Grain refinement of 5083 based aluminum alloy sheets by warm rolling

Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling

The effect of chemical composition and the hot rolling operations on the microstructure and mechanical properties of in situ aluminum matrix composite with Mg2Si phase as the reinforcement was studied. It was revealed that the modification by phosphorous results in the rounder (more spherical) primary and secondary (eutectic) magnesium silicide intermetallics. During hot rolling, the primary pa...

EFFECT OF FINISH ROLLING TEMPERATURE ON MICROSTRUCTURE,TEXTURE AND PLANAR ANISOTROPY IN ALUMINUM ALLOY AA3004 SHEETS

AA3004 alloy is widely used in can making. The major concern in the production of canbodies is earing, which develop by high planar anisotropy of rolled sheet. Balance ofrecrystallisation and rolling textures together with a uniform and fine grain microstructure canminimize the earing. The effects of finish rolling temperature (FRT) on planar anisotropy,microstructure, texture development and m...

Flexible Forming of Thin Aluminum Alloy Sheets

Flexible forming is a sheet metal forming process with the application of soft material tooling. In this study, flexible (silicone rubber, SR, and styrene butadiene rubber, SBR) and semi-rigid (polyamide 66, PA) polymeric materials were adopted to make several upper dies which were used in combination with aluminium lower dies. Stamping operations were performed on a thin aluminium alloy sheet ...

Influence of Process Parameters on Grain Refinement in AA1050 Aluminum During Cold Rolling

The microstructure evolution during cold rolling of commercial purity AA1050 aluminum is investigated through numerical simulations. A finite strain elasto-viscoplastic constitutive model is employed, where the dislocation density and average grain size are taken as variables characterizing the deformed microstructure. Grain size evolution due to dynamic recrystallization is considered and the ...

Characterization of Nanocrystalline Aluminum Alloy 5083 Powders Produced by Cryogenic Attrition