Grain Refinement during Rapid Solidification of Aluminum–Zirconium Alloys Using Electrospark Deposition
نویسندگان
چکیده
منابع مشابه
Development of Metastable Solidification Structures Using the Electrospark Deposition Process
Electrospark deposition (ESD) was studied to investigate the possibility of forming non-equilibrium microstructures in Al alloy systems. The results have demonstrated that the level of supersaturation is system-dependent. The Al-10 wt% Mg system exhibited a complete supersaturation, while the Al-Si system had a supersaturation level reaching about 1wt%. The ESD process was also used to demonstr...
متن کاملPhase-field modelling of rapid solidification in alloy systems: Spontaneous grain refinement effects
Phase-field modelling of rapid alloy solidification, in which the rejection of latent heat from the growing solid cannot be ignored, has lagged significantly behind the modelling of conventional casting practises which can be approximated as isothermal. This is in large part due to the fact that if realistic materials properties are adopted the ratio of the thermal to solute diffusivity (the Le...
متن کاملRapid solidification behavior of Zn-rich Zn–Ag peritectic alloys
Rapid solidification experiments, including laser remelting, melt-spinning and wedge casting, were carried out to investigate the rapid solidification behavior of Zn-rich Zn–Ag peritectic alloys containing up to 9.0 at% Ag. For comparison, Bridgman solidification experiments of the same alloys were also carried out for growth velocities ranging from 0.02 to 4.82 mm/s, which were lower than that...
متن کاملMODELLING OF THE PERMEABILITY FOR COLUMNAR DENDRITE STRUCTURES DURING SOLIDIFICATION OF MUSHY ALLOYS
A numerical model has been developed for the determination of liquid flow permeability through columnar dendrite during growth. The model is inclusive two stages, first numerical evolution of the dendrite shape during growth, and second numerical determination of the interdendritic liquid permeability. Simulation results shown which solute concentration by evolution of dendrite shape could resu...
متن کاملContraction of Aluminum Alloys during and after Solidification
A technique for measuring the linear contraction during and after solidification of aluminum alloys was improved and used for examination of binary and commercial alloys. The effect of experimental parameters, e.g., the length of the mold and the melt level, on the contraction was studied. The correlation between the compositional dependences of the linear contraction in the solidification rang...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2013
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.md201228