Grain Boundary Segregation in Alumina Scales Formed on Fe-Cr-Al Alloy
نویسندگان
چکیده
منابع مشابه
Grain Boundary Specific Segregation in Nanocrystalline Fe(Cr)
A cross-correlative precession electron diffraction - atom probe tomography investigation of Cr segregation in a Fe(Cr) nanocrystalline alloy was undertaken. Solute segregation was found to be dependent on grain boundary type. The results of which were compared to a hybrid Molecular Dynamics and Monte Carlo simulation that predicted the segregation for special character, low angle, and high ang...
متن کاملSEGREGATION AT SPECIAL GRAIN BOUNDARIES IN Fe-Si ALLOY BICRYSTALS
The segre ation of silicon to the C=3, 112) and C=S, (013) symmetrical grain boundaries 1 was studied in well-fefined bicrystals of an Fe-l .9 at%Si alloy annealed in the range 773 1173 K using Auger electron spectroscopy. The segregation enthal y, AI1 = -8.1 * 0.5 kJ/mol, and entropy, AS = -69 r 0.4 i/(mol K), were determined for the (013f grain boundary in the temperature range 973 1173 K. Fo...
متن کاملPhase Separation kinetics in Fe-Cr-Al alloy
9 The α α phase separation kinetics in a commercial Fe-20 wt% Cr-6% Al oxide dispersion-strengthened PM 1
متن کاملOn the Relation Between Oxide Ridge Evolution and Alloy Surface Grain Boundary Disorientation in Fe–22 wt % Cr Alloys
D On the Relation Between Oxide Ridge Evolution and Alloy Surface Grain Boundary Disorientation in Fe–22 wt % Cr Alloys Jingxi Zhu, Laura M. Fernandez Diaz, Gordon R. Holcomb,* Paul D. Jablonski,* Christopher J. Cowen, David E. Laughlin, David Alman, and Seetharaman Sridhar National Energy Technology Laboratory, Pittsburgh, Pennsylvania 15236, USA Department of Materials Sciences and Engineerin...
متن کاملSintering and yttrium grain boundary segregation in sub-micron grain size alumina
Sintering behavior with and without external stress was investigated using undoped and doped (1500 ppm yttria) sub-micron a-alumina powders. The yttria doped alumina showed anomalous behavior with grain size around 0.9 pm, a second peak in densification rate during free sintering and a stagnation followed by a steep increase in flow stress during sinter forging. These were thought to correspond...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materia Japan
سال: 2000
ISSN: 1340-2625,1884-5843
DOI: 10.2320/materia.39.966