Gradual failure in high-performance unidirectional thin-ply carbon/glass hybrid composites under bending

نویسندگان

چکیده

This paper introduces new composite architectures using carbon and glass fibre-reinforced epoxy prepregs to achieve gradual failure under bending. The concept is based on a technique developed by the authors design hybrid composites with in tension combined beam theory identify control sequence of plies layups. Two layups are designed standard ply thickness S-Glass sub-laminates made out intermediate high modulus thin-ply prepregs. tested 4-point bending loading where alongside values flexural displacement achieved. No catastrophic observed throughout whole process. layer-by-layer surface layers tensile side produces brush-like appearance. Microscopy observations from interrupted tests verified fragmentation high-modulus layer followed delamination side, as well stable shear cracks compression side.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Transverse compression failure of unidirectional composites

Y. Hu*, N.K. Kar andS.R. Nutt Gill Composites Center, Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, California Abstract: The mechanical response of unidirectional composites subject to uniaxial transverse compressive loads was measured and analyzed by finite element simulation. Consistency in failure plane orientation was observed when...

متن کامل

Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics

Due to their sensitivity to impact-induced delamination, woven fabric reinforced polymer composites have limited practical applications. Hybridization of polymer composites has been proposed as a solution to this problem. In this study, the effects of fiber reinforcement type, hybridization method, plies stacking sequence and loading rate on mode I delamination behavior of pure basalt, pure nyl...

متن کامل

Failure Behavior of Unidirectional Composites under Compression Loading: Effect of Fiber Waviness

The key objective of this work is to highlight the effect of manufacturing-induced fiber waviness defects on the compressive failure of glass fiber-reinforced unidirectional specimens. For this purpose, in-plane, through-thickness waviness defects (with different waviness severities) are induced during the manufacturing of the laminate. Numerical and experimental results show that the compressi...

متن کامل

On Bending Tests of Five - Ply

K-factor has Ions been used as a modifier of section modulus In the calculation of bending moment for plywood beams. No comparable modification of moment ot inertia is included In current reoommendatioDS for calculating plywood deflection at span-depth ratios of 30: 1 or greater. Results of limited testing lend support 'to the authors' contention that, where "shear" strains are signifIcant, the...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Composite Structures

سال: 2021

ISSN: ['0263-8223', '1879-1085']

DOI: https://doi.org/10.1016/j.compstruct.2021.114128