Glue-laminated bamboo for dowel-type moment-resisting connections

نویسندگان

چکیده

Research efforts have been devoted to glue-laminated bamboo (GLB) as an alternative engineered timber. However, some research has shown that GLB exhibits brittle failure at smaller displacement when compared with Glulam. To address this issue and enhance the mechanical performance, we propose use Glass Fibre Reinforced Polymer (GFRP) reinforce in moment-resisting connections. A total of 24 connections were tested discuss effectiveness different reinforcement strategies. The test results showed reinforced by GFRP on both sides underwent significantly higher deformation before reaching ultimate strength, which demonstrates enhanced deformability strength could increase up 37% unreinforced ones. Push-over analyses carried out study understand strategies portal frames, justifies double-sided reinforcement.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Moment-resisting connections in glulam beams

This paper describes an experimental investigation into the use of steel bars bonded into glulam timber beams with epoxy resins in order to provide moment-resisting joints between glulam beams and steel supports. The objective of this research was to provide information about the bending and shear strength of such connections. Past research has investigated the use of steel rods epoxy bonded in...

متن کامل

Experiments on dowel-type timber connections

Dowel-type connections are commonly used in timber engineering for a large range of structural applications. The current generation of design rules is largely based on empiricism and testing and lacks in many parts a stringent mechanical foundation. This often blocks an optimized use of the connections, which is essential for the design of economically efficient structures. Moreover, it severel...

متن کامل

Non-Linear Behavior of New (FSFN) Moment Resisting Connections in Comparison to the Existing KBB Connections in Steel Frames

After Northridge (1994) and Kobe (1995) earthquakes, several studies have been conducted to improve the seismic performance of steel structures. In this investigation, new steel moment-resisting connections (FSFN) developed by the authors, were studied by the non-linear numerical analysis. These connections were single-sided beam-to-column assemblies that are representative of exterior beam-to-...

متن کامل

Period Formulas for Moment-resisting Frame Buildings

Most seismic codes specify empirical formulas to estimate the fundamental vibration period of buildings. Evaluated first in this paper are the formulas specified in present US codes using the available data on the fundamental period of buildings “measured” from their motions recorded during eight California earthquakes, starting from the 1971 San Fernando earthquake and ending with the 1994 Nor...

متن کامل

assessment of the park- ang damage index for performance levels of rc moment resisting frames

چکیده هدف اصلی از طراحی لرزه ای تامین ایمنی جانی در هنگام وقوع زلزله و تعمیر پذیر بودن سازه خسارت دیده، پس از وقوع زلزله است. تجربه زلزله های اخیر نشان داده است که ساختمان های طراحی شده با آیین نامه های مبتنی بر نیرو از نظر محدود نمودن خسارت وارده بر سازه دقت لازم را ندارند. این امر سبب پیدایش نسل جدید آیین نامه های مبتنی بر عملکرد شده است. در این آیین نامه ها بر اساس تغییرشکل های غیرارتجاعی ...

15 صفحه اول

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Composite Structures

سال: 2021

ISSN: ['0263-8223', '1879-1085']

DOI: https://doi.org/10.1016/j.compstruct.2021.113848