Glass binder development for a glass-bonded sodalite ceramic waste form
نویسندگان
چکیده
منابع مشابه
Radiation Damage of a Glass-bonded Zeolite Waste Form Using Ion Irradiation
Glass-bonded zeolite is being considered as a candidate ceramic waste form for storing radioactive isotopes separated from spent nuclear fuel in the electrorefining process. To determine the stability of glass-bonded zeolite under irradiation, transmission electron microscope samples were irradiated using high energy helium, lead, and krypton. The major crystalline phase of the waste form, whic...
متن کاملSintered glass–ceramic from municipal solid waste incinerator ashes
In the present study, the sinter-crystallization behavior of a glass from municipal solid waste incineration ashes was investigated. The crystallization kinetics were estimated by DTA at different heating rates and the formed crystalline phases were evaluated by XRD. The sintering was studied at different heating rates and at different holding temperatures by dilatometry, measuring the % of lin...
متن کاملBioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering
Traditionally, bioactive glasses have been used to fill and restore bone defects. More recently, this category of biomaterials has become an emerging research field for bone tissue engineering applications. Here, we review and discuss current knowledge on porous bone tissue engineering scaffolds on the basis of melt-derived bioactive silicate glass compositions and relevant composite structures...
متن کاملDevelopment and Testing of a Glass Waste Form for the Immobilization of Plutonium
Two alkali-tin-silicate (ATS) glasses have been prepared at Argonne National Laboratory (ANL) as part of our ongoing research in radioactive waste glass development. These glasses dissolved 5% and approximately 7% Pu. Early corrosion test results indicate that Pu-bearing ATS glass is extremely durable. The initial goal in this project concerned equally both the solubility of Pu and the durabili...
متن کاملLithium Disilicate Glass-Ceramic
ceramic on light transmission of light-emitting diode (LED) and quartz-tungsten-halogen units (QTH) were evaluated. Ceramic IPS e.max CAD shades A1, A2, A3, A3.5, high (HT) and low (LT) translucency were cut (1, 2, 3, 4 and 5 mm). Light sources emission spectra were determined. Light intensity incident and transmitted through each ceramic sample was measured to determine light transmission perc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nuclear Materials
سال: 2017
ISSN: 0022-3115
DOI: 10.1016/j.jnucmat.2017.03.041