Glass and Glass-Ceramic Matrix Composite Materials.
نویسندگان
چکیده
منابع مشابه
Granite Based Glass-Ceramic Materials
In this study, production possibility of glass and glass-ceramic produced from granite was investigated. The composition of granite based glass bath mixture was 50 wt% granite, 25 wt% dolomite and 25 wt% sodium carbonate. Composition that was grounded and mixed in a ball mill for 2 h was melted at 1500 ◦C for 1 h. Glass samples were heat treated for crystallization to produce glass-ceramic mate...
متن کاملWear Properties of Gabbro Based Glass and Glass-Ceramic Materials
Glass-ceramic materials were developed from gabbro including MgO and Al2O3 additives. Heat treatments for phase transformation from glassy matrix to glass-ceramic were carried out at 1000 ◦C for 3 h. X-ray di raction studies conducted on the glass-ceramic samples revealed that the phases formed in the glass-ceramics were cordierite, anorthite, diopsitic augite, forsterite and andesine. Glass an...
متن کاملZirconia Toughening of Glass-ceramic Materials
A ceramic material suitable for packaging of large scale integrated circuit is produced by the process of forming a mixture of a powdered glass ceramic material which is a glassy precursor to cordierite ceramic material, formed by the steps which are as follows: a. Mix tetragonal phase material selected from the group consisting of zirconia or hafnia powder con taining a stabilizing oxide compo...
متن کاملSynthesis and characterisation of dental composite materials reinforced with fluoroapatite–mullite glass–ceramic particles
Glass–ceramic filler particles containing various amounts of fluoroapatite–mullite crystalline phases were synthesised using SiO2–Al2O3–P2O5–CaF2–CaO system as the base glass formulation. Different additives were used to promote crystallisation in this system. Composite samples were prepared by incorporating the silane treated glass–ceramic particles into the BisGMA/TEGDMA (60 : 40 mass ratio) ...
متن کاملLithium Disilicate Glass-Ceramic
ceramic on light transmission of light-emitting diode (LED) and quartz-tungsten-halogen units (QTH) were evaluated. Ceramic IPS e.max CAD shades A1, A2, A3, A3.5, high (HT) and low (LT) translucency were cut (1, 2, 3, 4 and 5 mm). Light sources emission spectra were determined. Light intensity incident and transmitted through each ceramic sample was measured to determine light transmission perc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2001
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.109.1271_s99