Geopolymer, Calcium Aluminate, and Portland Cement-Based Mortars: Comparing Degradation Using Acetic Acid

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Rheology of Geopolymer: Comparative Study between Portland Cement and Metakaolin Based Geopolymer

Metakaolin based geopolymers are presented in many studies as an alternative to normal Portland cement. Previous studies have focused on their chemical and mechanical properties, their microstructures and their potential uses, but very few on their rheological behaviour. Our work highlights the main differences that exist between geopolymer and Portland cement. These materials behave as Newtoni...

متن کامل

Acid Resistance of Fly ash based Geopolymer mortars

Geopolymers are a new promising binder manufactured by activation of a solid aluminosilicate source material with a highly alkaline activating solution and aided by heat. Fly ash, considered to be a waste material is rich in silica and alumina and hence can be used as a source material for manufacture of Geopolymers. These binders have been reported to achieve high early strength and better dur...

متن کامل

Compressive strength of Portland cement pastes and mortars containing Cu-Zn nano-ferrite

This study is concerned with the synthesizing of Cu-Zn nano-ferrite particles in the laboratory applying simple techniques. The morphology of the synthesized nano-particles was analyzed using Transmission Electron Microscopy (TEM), and the minerals were identified using X-ray diffraction (XRD). The nano material was used to replace 1- 4 percent by weight of Portland cement in cement pastes and ...

متن کامل

Limestone reaction in calcium aluminate cement–calcium sulfate systems

Article history: Received 18 June 2014 Accepted 7 May 2015 Available online xxxx

متن کامل

Compressive strength of Portland cement pastes and mortars containing Cu-Zn nano-ferrite

This study is concerned with the synthesizing of Cu-Zn nano-ferrite particles in the laboratory applying simple techniques. The morphology of the synthesized nano-particles was analyzed using Transmission Electron Microscopy (TEM), and the minerals were identified using X-ray diffraction (XRD). The nano material was used to replace 1- 4 percent by weight of Portland cement in cement pastes and ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials

سال: 2019

ISSN: 1996-1944

DOI: 10.3390/ma12193115