GEOMETRIC OPTIMIZATION OF “+”-SHAPED CAVITY USING CONSTRUCTAL THEORY
نویسندگان
چکیده
منابع مشابه
Constructal H-shaped cavities according to Bejan’s theory
In this paper, we use Bejan’s Constructal theory to optimize the geometry of a H-shaped cavity that intrudes into a solid conducting wall. The objective is to minimize the global thermal resistance between the solid and the cavity. Internal heat generation is distributed uniformly throughout the solid wall. The cavity surface is isothermal, while the solid wall has adiabatic conditions on the o...
متن کاملConstructal Theory Applied to the Geometric Optimization of Elliptical Cavities into a Solid Conducting Wall
This work reports, according to Bejan’s Constructal theory, the geometric optimization of an elliptical cavity that intrudes into a solid conducting wall. The objective is to minimize the global thermal resistance between the solid and the cavity. There is uniform heat generation on the solid wall. The cavity is optimized for two sets of thermal conditions: isothermal cavity and cavity bathed b...
متن کاملGeometric optimization of shapes on the basis of Bejan’s Constructal theory
This paper documents the optimization of architecture in accordance with Bejan’s Constructal theory. For illustration, we consider the optimization of a cavity that intrudes into a solid conducting wall, having internal heat generation and adiabatic conditions on the outer surfaces. The cavity is rectangular, with fixed volume and variable aspect ratio, and the solid is trapezoidal. The objecti...
متن کاملConstructal theory of pattern formation
Introduction Conclusions References Tables Figures Back Close Full Screen / Esc Papers published in Hydrology and Earth System Sciences Discussions are under open-access review for the journal Hydrology and Earth System Sciences Abstract Introduction Conclusions References
متن کاملReducing Pressure Drop in Microscale Channel Using Constructal Theory
The effectiveness of microchannels in enhancing heat transfer has been demonstrated in the semiconductor industry. In order to tap the microscale heat transfer effects into macro geometries, overcoming the cost and technological constraints, microscale passages were created in macro geometries machined using conventional fabrication methods. A cylindrical insert was placed within a pipe, and ge...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Revista de Engenharia Térmica
سال: 2017
ISSN: 1676-1790
DOI: 10.5380/reterm.v16i1.62195