Generating production profiles for an-oil field
نویسندگان
چکیده
منابع مشابه
Peak production in an oil depletion model with triangular field profiles
In this paper a model of oil depletion is analyzed in which the shapes of field profiles are triangular and the sizes of successive fields decrease monotonically. It is shown that the curve representing the rate of production for this model is piecewise linear and concave up to a certain point after which it is monotone decreasing. Equations for natural smooth approximating curves having unique...
متن کاملan application of equilibrium model for crude oil tanker ships insurance futures in iran
با توجه به تحریم های بین المملی علیه صنعت بیمه ایران امکان استفاده از بازارهای بین المملی بیمه ای برای نفتکش های ایرانی وجود ندارد. از طرفی از آنجایی که یکی از نوآوری های اخیر استفاده از بازارهای مالی به منظور ریسک های فاجعه آمیز می باشد. از اینرو در این پایان نامه سعی شده است با استفاده از این نوآوری ها با طراحی اوراق اختیارات راهی نو جهت بیمه گردن نفت کش های ایرانی ارائه نمود. از آنجایی که بر...
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Prediction of rock strength parameters for an Iranian oil field using neuro-fuzzy method
Uniaxial compressive strength (UCS) and internal friction coefficient (µ) are the most important strength parameters of rock. They could be determined either by laboratory tests or from empirical correlations. The laboratory analysis sometimes is not possible for many reasons. On the other hand, Due to changes in rock compositions and properties, none of the correlations could be applied as an ...
متن کاملCategorical fracture orientation modeling: applied to an Iranian oil field
Fracture orientation is a prominent factor in determining the reservoir fluid flow direction in a formation because fractures are the major paths through which fluid flow occurs. Hence, a true modeling of orientation leads to a reliable prediction of fluid flow. Traditionally, various distributions are used for orientation modeling in fracture networks. Although they offer a fairly suitable est...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematical Modelling
سال: 1987
ISSN: 0270-0255
DOI: 10.1016/0270-0255(87)90669-5