منابع مشابه
Electrospun mullite fibers from the sol–gel precursor
Mullite fibers with diameters from 400 nm to 10 lm were fabricated from the sol–gel precursors using the electrospinning method. During the precursor synthesis, the hydrolysis was controlled to obtain highly viscous mullite sols. The viscous mullite sols were then diluted and mixed with a small amount of polyethylene oxide. Controlling the precursor rheology and spinning conditions, we obtained...
متن کاملGum Tragacanth Fibers Introducing Primitive GT Fibers (RESEARCH NOTE)
In this research, a method for producing gum tragacanth (GT) fibers is presented. Ribbon type GT of Astragalus Gummifer species were obtained from local production lands. The gum was treated with alkali to increase its process ability, and allowed to stand for a period of time to reach the proper viscosity and/or to "ripen". Samples with different ripening times were prepared and their viscosit...
متن کاملFABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملFabrication and Anti-Oxidation Ability of SiC-SiO2 Coated Carbon Fibers Using Sol-Gel Method
The paper proposed a method to improve the anti-oxidation performance of carbon fibers (CF) at high temperature environment by coating silicon dioxide (SiO₂) and silicon carbide (SiC). The modified sol-gel method had been used to ensure the proper interface between fibers and coating. We used polydimethylsiloxane and ethyl orthosilicate to make stable emulsion to uniformly disperse SiC nanopart...
متن کاملSolid phase microextraction fibers coated with sol-gel aminopropylsilica/polydimethylsiloxane: development and its application to screening of beer headspace.
The preparation and applicability of solid phase microextraction (SPME) fibers coated with a sol-gel organically modified silica based on 3-aminopropyltrimethoxysilane and polydimethylsiloxane (APTMS/PDMS) are described here. Micrographs of the coated fibers revealed a rugous surface; the thickness of the coating was estimated to be less than 30 microm. The APTMS/PDMS fibers were tested with sy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: FIBER
سال: 2001
ISSN: 0037-9875
DOI: 10.2115/fiber.57.p_11