Gear-Cutting Method of Parallel Depth Hypoid Gears. 3rd Report. The Ellipse of Tooth Bearing and Some Gear-Cuttings.
نویسندگان
چکیده
منابع مشابه
Predicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank under Cyclic Contact Loading
In this paper, a two-dimensional computational model is proposed for predicting the initiation position and propagation path of subsurface crack of spur gear tooth flank. In order to simulate the contact of teeth, an equivalent model of two contacting cylinders is used. The problem is assumed to be under linear elastic fracture mechanic conditions and finite element method is used for numerical...
متن کاملPerformance analysis of generated hypoid gear based on measured tooth flank form data
Article history: Received 18 February 2013 Received in revised form 19 September 2013 Accepted 22 September 2013 Available online 24 October 2013 A method for predicting and analyzing the tooth contact pattern, vibration, and strength of a generated hypoid gear is needed to achieve a low-noise design and adequate quality control. However, it is not easy to analyze the performance of a generated...
متن کاملSimulation Research and Parameter Optimization for Hypoid Gear NC Machining
The paper studied hypoid gear CNC machining theory and simulation processing. Through construct a simulation case of hypoid gear machining system, optimization processing parameters for the main aspects, verify the effectiveness of pre-correction system.
متن کاملParallel Simulation of Bevel Gear Cutting Processes with OpenMP Tasks
Modeling of bevel gear cutting processes requires highly flexible data structures and algorithms. We compare OpenMP3.0 tasks with previously applied approaches like nesting parallel sections and stack based algorithms when parallelizing recursive procedures written in Fortran 95 working on binary tree structures.
متن کاملDesign and Manufacture of Spiral Bevel Gears with Reduced Transmission Errors
A method for the determination of the optimal polynomial functions for the conduction of machine-tool setting variations in pinion teeth finishing in order to reduce the transmission errors in spiral bevel gears is presented. Polynomial functions of order up to five are applied to conduct the variation of the cradle radial setting and of the cutting ratio in the process for pinion teeth generat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 2003
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.69.459