Gas Sensitive Materials Based on Polyacrylonitrile Fibers and Nickel Oxide Nanoparticles
نویسندگان
چکیده
The results of the synthesis PAN/NiO composite fibers by electrospinning method are presented. installation included a rotating drum collector for collecting fibers. Nickel oxide nanoparticles were synthesized solution combustion from nickel nitrate and urea. It was shown that monophase NiO with average particle sizes 154 nm could be this method. investigated X-ray diffraction analysis scanning electron microscopy. Based on nanoparticles, obtained electrospinning. modified heat treatment (stabilization carbonization) processes. Obtained C/NiO SEM, EDAX. used detection acetone acetylene in air. These show based electrospun have potential applications gas sensors.
منابع مشابه
FABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملHighly Sensitive Amperometric Sensor Based on Gold Nanoparticles Polyaniline Electrochemically Reduced Graphene Oxide Nanocomposite for Detection of Nitric Oxide
A sensitive electrochemical sensor was fabricated for selective detection of nitric oxide (NO) based on electrochemically reduced graphene (ErGO)-polyaniline (PANI)-gold nanoparticles (AuNPs) nanocomposite. It was coated on a gold (Au) electrode through stepwise electrodeposition to form AuNPs-PANI-ErGO/Au electrode. The AuNPs-PANI-rGO nanocomposite was characterized by Field Emission Scanning ...
متن کاملMultiwall Carbon Nanotube Reinforcement of Polyacrylonitrile Fibers
Aligning multiwall carbon nanotubes (MWNTs) with the direction of load is desirable for maximizing tensile reinforcement in composites. This has been accomplished by spinning composite fibers containing MWNTs[1]. The shear and elongational flow fields inherent to fiber processing cause the MWNTs to align with the fiber axis. Efficient stress transfer from the matrix to the MWNTs is also a cruci...
متن کاملPolyacrylonitrile Single-Walled Carbon Nanotube Composite Fibers
! " # $ @ %&' ( ) * " + , * -" + , " ( ) . / %0' " *1 ) ( # , 23 4 5 63 3"3 ) , 1 # 3 3 7 77 89* : ; 6 3 6 -" <=3) 3 1 4" + > " ( ) > * # 3 ) 61 *1 1 4 , 1 # > 1 9 ? 6 3# "63 ,@ AA $ 89* : %0' ( 3 44 66; *1 ) 4? 1 4 / 3 6 4 *#63 " 63 3"3 ) , 1 # " A7 A %&&' , 6 B B 6 6"== 3 4 # 3 C)) 1 ) ? > 6 1 8 D D D E$A: 3 1 6 1 4 3 5 1 C) ) 1 ) *1 3 ) 1 > 6 1 85 FE D D D A 4 5 FE D 7D D : *"== 3 3 > 1 9 ? ...
متن کاملSynthesis of Polyacrylonitrile Based Nanoparticles via Aqueous Dispersion Polymerization
The monodisperse and controlled polymer nanoparticles have attracted much attention in academic and industrial fields. Due to small size and extremely large specific surface area, nanoparticles could be used to the fields of drug delivery system, microencapsulation, chromate graphy, catalyst, organic/inorganic hybrid materials, and templates for porous inorganic materials. The dispersion polyme...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of composites science
سال: 2022
ISSN: ['2504-477X']
DOI: https://doi.org/10.3390/jcs6110326