Gas sensing performance of Nb2CTx synthesized by hydrothermal assisted in-situ HF generation etching method

نویسندگان

چکیده

Abstract The Nb 2 CT x prepared by hydrothermal-assisted in-situ HF generation etching was investigated in terms of its gas sensor performance. obtained mixing AlC with pure water, hydrochloric acid, and fluoride (LiF or NH 4 F) then hydrothermally treated at 180 °C for 24 h. This hydrothermal treatment more efficient safer the synthesis than direct etching. etched LiF had relatively wide interlayer spacing because hydration radius Li + larger that . results also suggest O 5 is formed during process. These spacing, surface termination, secondary phases formation can be controlled etchant, extended applicability insoluble etchants. synthesized evaluated as a room temperature air presence designated concentrations 6 different gases, which exhibited good sensitivity repeatability fast recovery time, except 3 Hydrothermal-assisted contributed to providing sufficient response without an exfoliation

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Surfactant-assisted synthesis of Barium hexaferrite nanoparticles by hydrothermal method

In the present work, the synthesis of Barium hexaferrite (BaFe12O19) nanoparticles in thepresence of a large excess amount of OH− anions by the hydrothermal method in the presence and absence of surfactants such as Sodium dodecyl benzene sulfonate and Triton X-114 was reported. The optimized temperature in the absence of surfactant was determined (200 °C) and then Barium hexaferrite nanoparticl...

متن کامل

Photoluminescence and hydrogen gas-sensing properties of titanium dioxide nanostructures synthesized by hydrothermal treatments.

Titanium dioxide (TiO(2)) nanostructures were synthesized by microwave-assisted and conventionally heated hydrothermal treatment of TiO(2) powder. The tubular structures were converted to a rodlike shape by sintering the samples at various temperatures in air for 3 h. This was accompanied by phase transformation largely influenced by the method of synthesis and the mode of heating. The X-ray di...

متن کامل

Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions

Nano-porous silicon were simply prepared from p-type single crystalline silicon wafer by electrochemical etching technique via exerting constant current density in two different HF-Ethanol and HF-Ethanol-H2O solutions. The mesoporous silicon layers were characterized by field emission scanning electron microscopy and scanning electron microscopy. The results demonstrate that the width of nano-p...

متن کامل

Gas Sensing Properties of SnO2 Thin Films Modified by Ag Nanoclusters Synthesized by SILD Method

The effect of SnO2 surface modification by Ag nanoclusters, synthesized by SILD method, on the operating characteristics of thin film gas sensors was studied and models for the promotional role of Ag additives were discussed. It was found that mentioned above approach can be used for improvement both the sensitivity and the rate of response of the SnO2-based gas sensors to CO and H2. At the sam...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Discover materials

سال: 2023

ISSN: ['2730-7727']

DOI: https://doi.org/10.1007/s43939-023-00048-4