Gas permeability and permselectivity in polyimide films.
نویسندگان
چکیده
منابع مشابه
Cryogenic Permeability of Polyimide Shells
Polyimide shells are used as targets in Inertial Confinement Fusion (ICF) experiments. These shells are filled with DT gas, then cooled to low temperatures for cryogenic laser shots. During target preparation, shells require careful pressure and temperature control due to their sensitivity. The pressure is governed partly by permeation through the shell wall, which can only be determined with t...
متن کاملPolyimide/Carbon Nanotube Composite Films
Low color, space environmentally durable polymeric films with sufficient electrical conductivity to mitigate electrostatic charge (ESC) build-up have potential applications on large, deployable, ultra-light weight Gossamer spacecraft as thin film membranes on antennas, solar sails, thermal/optical coatings, multi-layer insulation blankets, etc.. The challenge has been to develop a method to imp...
متن کاملAn apparatus for measuring the gas permeability of films.
The gas permeability of plastic films is important in packaging, containment, and agricultural fumigation. Recently, an approach for estimating the mass transfer coefficient of vapors across a film was presented by Papiernik et al. (2001). The mass transfer coefficient is an intrinsic property of a film-chemical combination, independent of the concentration gradient maintained across the film. ...
متن کاملGas Separation Properties of Polyimide Thin Films on Ceramic Supports for High Temperature Applications
Novel selective ceramic-supported thin polyimide films produced in a single dip coating step are proposed for membrane applications at elevated temperatures. Layers of the polyimides P84®, Matrimid 5218®, and 6FDA-6FpDA were successfully deposited onto porous alumina supports. In order to tackle the poor compatibility between ceramic support and polymer, and to get defect-free thin films, the e...
متن کاملInfluence of Surface Treatment of Polyimide Film on Adhesion Enhancement between Polyimide and Metal Films
In this work, the effects of chemical treatment of polyimide films were studied by FT-IR, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and contact angles. The adhesion characteristics of the films were also investigated in the peel strengths of polyimide/aluminum films. The increases of surface functional groups of KOH-treated polyimide films were greatly correlated wit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KOBUNSHI RONBUNSHU
سال: 1990
ISSN: 0386-2186,1881-5685
DOI: 10.1295/koron.47.945