منابع مشابه
Interferometer Calibration using the Random Ball Test
Wenrui Cai, Dae Wook Kim, Ping Zhou, Robert E. Parks, James H. Burge College of Optical Science, University of Arizona, 1630 E. University Blvd., Tucson, AZ, USA 85721 [email protected] Abstract: Two different approaches (systematically and randomly rotating the CaliBall to calibrate a Fizeau interferometer transmission sphere) are demonstrated with similar calibration results. Thus, the ...
متن کاملThe Aerospace Imaging Interferometer Aliseo: Further Improvements of Calibration Methods and Assessment of Interferometer Response
ALISEO (Aerospace Leap-frog Imaging Stationary Interferometer for Earth Observation) belongs to the stationary interferometers representing a promising architecture for future Earth Observation (EO) sensors due to their simple optical layout. ALISEO has been selected by the Italian Space Agency as the principal payload for a new optical mission based on a micro-satellite (MIOsat). Payloads plan...
متن کاملCalibration and validation of the advanced E-Region Wind Interferometer
The advanced E-Region Wind Interferometer (ERWIN II) combines the imaging capabilities of a CCD detector with the wide field associated with field-widened Michelson interferometry. This instrument is capable of simultaneous multi-directional wind observations for three different airglow emissions (oxygen green line (O(1S)) at a height of ∼ 97 km, the PQ(7) and PP(7) emission lines in the O2(0–1...
متن کاملCalibration of MIDI , the Mid - infrared Interferometer for the VLTI
Calibration of MIDI, the Mid-infrared Interferometer for the VLTI MIDI is the MID-infrared Interferometric Instrument at the Very Large Telescope Interferometer (VLTI). It will perform long-baseline stellar interferometry in the N band (8. . . 13 μm). In the run-up of setting up MIDI, some preparatory tasks had to be solved concerning the calibration of the instrument in the laboratory. Being a...
متن کاملCalibration of a Quadrupole Gas Analyzer Using a Reference Gas*
A quadrupole gas analyzer system was calibrated for the gases H2, He, N2, 02, A, and Xe. The procedure involved first calibrating the system for argon, as the reference gas. This was done using conventional techniques. A mixture of the above gases was then introduced into the system to be calibrated. The system configuration was such that the ratio of the partial pressures of each of the test g...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the Bureau of Standards
سال: 1918
ISSN: 0096-8579
DOI: 10.6028/bulletin.344