Gas holdup in three-phase immobilized-cell bioreactors
نویسندگان
چکیده
منابع مشابه
Determination of optimum gas holdup conditions in a three-phase fluidized bed by genetic algorithm
Experiments have been carried out in a 0.1 m internal diameter, 1.88 m height vertical Plexiglas column with an antenna type modified air sparger in the gas-liquid distributor section. This arrangement provides uniform mixing of the fluids, ensures the gas entering the fluidizing section as fine bubbles and reduces the pressure drop encountered through a conventional distributor used for the pu...
متن کاملAn Electrical Conductivity Method for Axial Gas and Solid Holdup Determination in Three Phase Fluidized Beds
ISSN 2277 5056 | © 2012 Bonfring Abstract--Fluidization is an operation in which solid particles are kept under suspension supported by the upward flow of liquid/gas phase. In classic fluidization the solids density are higher than the liquid, where as in Inverse fluidization the solids density are lower than that of continuous liquid phase. The phase holdup measurements in three phase classic/...
متن کاملComparative Study of Immobilized Cell Bioreactors for Industrial Wastewater Treatment
The sources of occurrence of various pollutants from chemical process industries and there harmful effects have been highlighted. Typical composition of wastewater from various sources presented. The methods of treatment of wastewater briefly discussed. Special attention has been paid to the biological treatment mentioning the drawbacks of the traditional methods. The relative advantages of var...
متن کاملGas Holdup Behavior in Nylon Fiber Suspensions
The gas holdup behavior in a nylon fiber suspension with various fiber lengths (L = 2, 3, and 6 mm) is investigated. Experiments are performed over a range of superficial gas velocities (Ug≤ 18 cm/s) and a range of fiber mass fractions (0 ≤ C ≤ 1.8%) in a 15.24-cm-diameter semibatch bubble column. Day-to-day variations in the gas holdup create difficulties in interpreting the effect of the fibe...
متن کاملChip-based three-dimensional cell culture in perfused micro-bioreactors.
We have developed a chip-based cell culture system for the three-dimensional cultivation of cells. The chip is typically manufactured from non-biodegradable polymers, e.g., polycarbonate or polymethyl methacrylate by micro injection molding, micro hot embossing or micro thermo-forming. But, it can also be manufactured from bio-degradable polymers. Its overall dimensions are 0.7 1 x 20 x 20 x 0....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Biochemistry and Biotechnology
سال: 1990
ISSN: 0273-2289,1559-0291
DOI: 10.1007/bf02920272