Gas Flow at Very High Pressure and Speeds
نویسندگان
چکیده
منابع مشابه
Drag coefficient reduction at very high wind speeds
[1] The correct representation of the 10-m drag coefficient for momentum (K10) at extreme wind speeds is very important for modeling the development of tropical depressions and may also be relevant to the understanding of other intense marine meteorological phenomena. We present a unified boundary layer model for (K10), which takes account of both the wave field and spray production, and asympt...
متن کاملSpecial issue on broadband mobile communications at very high speeds
Future mobile communication systems aim at providing very high-speed data transmission, even under very high mobility scenarios such as high speed wheel-track trains (up to 574.8 km/h test speed or 380 km/h commercial speed), maglev trains (up to 581 km/h test speed or 431 km/h commercial speed), airplanes (about 4001000 km/h commercial speed), guided missiles (about 980–20,000 km/h) or spacecr...
متن کاملconsequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
Flow mechanisms in high pressure gas atomization
Very fine (d < 10/~m) metal and alloy powders can be produced efficiently by a high pressure gas atomization (HPGA) technique. Rapid solidification processing, metal injection molding, thermal spraying and other emerging powder-processing approaches benefit from the use of such fine powders. This paper reports on the results of an investigation of gas atomization process dynamics with emphasis ...
متن کاملPressure Calculation in the Flow Between Two Rotating Eccentric Cylinders at High Renolds Numbers
This paper reports the result of an analytical investigation of a steady, incompressible and viscous flow between two eccentric, rotating cylinders at high Reynolds number. A one dimensional case is far from reality because the gap between the cylinders is very small. Further, when their axes are displaced by a small distance, usually caused by bearing loads, two dimensional effects become obvi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Mechanica Slovaca
سال: 2020
ISSN: 1335-2393,1339-3073
DOI: 10.21496/ams.2021.003