Gas flow-assisted vacuum drying: identification of a novel process for attaining high-quality perovskite films
نویسندگان
چکیده
Controlling the nucleation and crystal growth in solution-processed metal halide perovskite (MHP) thin films is pivotal point fabricating homogenous pinhole-free films.
منابع مشابه
Ultrasound-Assisted Vacuum Drying of Wood: Effects on Drying Time and Product Quality
Ultrasonic energy was applied to assist the wood vacuum drying process. At a drying temperature of 60°C, the absolute pressure was either 0.05 MPa or 0.08 MPa; the ultrasonic power and frequency were 100 W and 28 kHz, respectively. The results showed that the effective water diffusivity of the specimens dried by the ultrasonic assisted vacuum drying at 0.05 MPa or 0.08 MPa were higher than that...
متن کاملmodeling of high power ultrasound-assisted tea drying process
tea is one of the most important medicinal plants which have a considerable effect on the treatment of cardiovascular disease and cancer. the drying process of tea leaves is carried out by hot air flow which consumes high level energy. the aim of the recent research was to investigate the procedure of high power ultrasound-assisted drying process of tea leaves. hybrid variety of chinese tea was...
متن کاملDevelopment of a novel method in TRMC for a Binary Gas Flow Inside a Rotating Cylinder
A new approach to calculate the axially symmetric binary gas flow is proposed Dalton’s law for partial pressures contributed by each species of a binary gas mixture (argon and helium) is incorporated into numerical simulation of rarefied axially symmetric flow inside a rotating cylinder using the time relaxed Monte-Carlo (TRMC) scheme and the direct simulation Monte-Carlo (DSMC) method. The res...
متن کاملFlow Pattern Identification and Pressure Drop Calculation for Gas-Liquid Flow in a Horizontal Pipeline
Two phase gas-liquid flow pattern in a horizontal pipeline is predicted very accurately using a newly-developed analytical relation. The pattern identification is based on one of the most widely used graphs, the Baker diagram, modified in a way that compensates for the unrealistic oversimplifications of recent works. The Kern's method of pressure drop calculation is used to obtain the frict...
متن کاملVacuum Drying Characteristics of Some Vegetables
In this research the drying of four kinds of vegetables was investigated in a vacuum dryer. The effect of temperature on drying rate of samples at various temperatures (30, 35 and 45 °C) was studied. Six thin-layer drying models were fitted to drying data and suitable model was selected from them. Then effective moisture diffusivity and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials advances
سال: 2021
ISSN: ['2633-5409']
DOI: https://doi.org/10.1039/d1ma00494h