Gamma-densitometry tomography of gas holdup spatial distribution in industrial-scale bubble columns
نویسندگان
چکیده
منابع مشابه
Eulerian simulation of bubble columns reactors and effect of various parameters on the gas holdup
Gas holdup and bubble size are important parameters for simulation and designing in bubble column reactors. Because based on these parameters, the available gas-liquid interfacial area is defined for mass transfer. In this paper, the results of applying magnetic fields on the velocity field and volume fraction of gas holdup are reported. Hydrodynamics of the bubble column in the reactors is inv...
متن کاملGas holdup in a gas-liquid-fiber semi-batch bubble column
A 4-m high, 15.24-cm diameter semi-batch bubble column connected to one of three perforated plate gas distributors with open area ratios A = 0.57%, 0.99%, and 2.14% is employed to study gas holdup and flow regime in Rayon and Nylon fiber suspensions. This study determines the effect of superficial gas velocity, fiber type, fiber mass fraction, fiber length, and aeration plate open area ratio on...
متن کاملIntegration of Particle to Bubble Adhesion Model in Design and Scale-Up of Slurry Bubble Columns
In slurry bubble column reactors, catalyst particles may adhere to gas bubbles. Thus, mass transfer limited reactions can be significantly improved either by increasing G-L mass transfer coefficient kL or specific surface area a. The scope of this work is to study the influence of model parameters on coalescence and G-L mass transfer, in order to develop new rules for design and scale-up of slu...
متن کاملGas Holdup Behavior in Nylon Fiber Suspensions
The gas holdup behavior in a nylon fiber suspension with various fiber lengths (L = 2, 3, and 6 mm) is investigated. Experiments are performed over a range of superficial gas velocities (Ug≤ 18 cm/s) and a range of fiber mass fractions (0 ≤ C ≤ 1.8%) in a 15.24-cm-diameter semibatch bubble column. Day-to-day variations in the gas holdup create difficulties in interpreting the effect of the fibe...
متن کاملDetermination of Bubble Size Distributions in Bubble Columns Using LDA
A new method is developed for the determination of bubble size distributions from experimental laser Doppler anemometry (LDA) data through simultaneous measurement of only two orthogonal velocity components and the intermittent time gaps arising out of bubbles passing through the measurement point. An experimentally verifiable assumption of axisymmetry allowed the calculation of the three-dimen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical Engineering Science
سال: 1997
ISSN: 0009-2509
DOI: 10.1016/s0009-2509(97)00032-8