Fuzzy logic to thermal and friction characteristics of turbulent air-flow over diamond-shaped turbulators
نویسندگان
چکیده
منابع مشابه
Numerical simulation of nanofluid flow over diamond-shaped elements in tandem in laminar and turbulent flow
In this paper, the Al2O3-water nanofluid flow in laminar and turbulent flows inside tubes fitted with diamond-shaped turbulators is numerically modeled. The nanofluid flow is modeled by employing a two-phase mixture method and applying the constant heat flux boundary condition at tube walls. In the results, the effects of different parameters such as the geometry of turbulators, volume fraction...
متن کاملTurbulent Flow over Cars
In this paper the flow behaviour over a number of car bodies is studied. For this purpose the unsteady 2-D incompressible Navier-Stokes equations have been applied. After averaging and nondimensionalizing the equations, the system of equations has been transformed from the Cartesian (x-y) coordinates to a body fitted generalized (-) coordinate. As the flow is incompressible, the density in the ...
متن کاملHeat transfer and friction characteristics of air flow in microtubes
Several researches dealing with the single-phase forced convection heat transfer inside microchannels have been published in the past decades. The performance of liquid flow has been proved that agrees with the conventional correlations very well. However, owing to the low heat transfer coefficient of gaseous flow, it is more difficult to eliminate the effects of thermal shunt and heat loss tha...
متن کاملA 3D Numerical Model to Investigate Mechanical, Thermal and Material Flow Characteristics in Friction Stir Welding of Copper Sheets
The objective of this study was to develop a numerical model for the prediction of temperature distribution, effective plastic strain distribution, and especially material flow in friction stir welding of copper plates. The DEFORM-3D software was used by incorporating a lagrangian incremental formulation. Threedimensional results of the material flow pattern which were extracted using the po...
متن کاملThe Solar Air Channels: Comparative Analysis, Introduction of Arc-shaped Fins to Improve the Thermal Transfer
The problem under investigation contains a computational simulation of a specific heat exchanger with complex geometry fins. The problem solved is potentially interesting for researchers and engineers working on solar collectors and aerospace industry. It is known that heat transfer enhancement can be achieved by creating longitudinal vortices in the flow. These vortices can be generated by arc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Communications in Heat and Mass Transfer
سال: 2021
ISSN: 0735-1933
DOI: 10.1016/j.icheatmasstransfer.2020.105001