Fuzzy Adaptive Control of Blank Holder Force in Circular-Cup Deep-Drawing. Forming Limit and Influencing Factors.
نویسندگان
چکیده
منابع مشابه
A fuzzy logic model to determine the effects of die/blank holder angle and punch radius on drawing ratio in angular deep drawing dies
Deep drawing process is one of the widely used methods in sheet-metal forming. With the deep drawing method, products of various geometrical shapes such as saucepans, tubes, perfume and soft drink cans can be obtained easily. Therefore, the optimization of the deep drawing process is very important for the industry. In conventional deep drawing method, no angle is given to the surfaces of die a...
متن کاملNumerical Determination of the Forming Limit Diagram for 304 Stainless Steel Based on Phase Change in Deep Drawing Process
Up to now a large number of models have been developed to measure or predict the damage in equipments. Some of these models have been implemented in ABAQUS software. To implement damage parameters in the software, it is necessary to perform complex and expensive practical tests. One of these damage models is Forming Limit Diagram (FLD).The purpose of this research is deriving required parameter...
متن کاملEffect of Strain Induced Martensite on the Deep Drawing Behavior of 304L Steel: Simulation and Experiment
Abstract In the present research, the behavior of 304L austenitic stainless steel in the deep drawing process has been studied at the room temperature through experimental and finite element simulation method. Magnetic method calibrated by XRD was used to measure induced-martensite. Martensite volume fraction in the various portion of the deep drawn cup under optimum Blank Holder Force (BHF) a...
متن کاملThe Effect of Ridges to Improve Ductility and Reduce Deformation Energy in Deep-Drawing Process
In this research, two new methods that improve the drawing depth of deep-drawing processes have been introduced. In the first technique, by creating ridges on the punch surface, the stress concentration is decreased on the blank near the punch edge, in turn increasing the drawing depth. The second method is based on the principle of reducing resistant force in the flange area between the die, t...
متن کاملfinite element simulation of process and springback of friction aided deep drawing using tapered blank holder divided into eight segments
in this paper, a novel technique on friction aided deep drawing using tapered blank holder divided into eight segments is proposed to overcome defect of friction aided deep drawing using four segments tapered blank holder technique. a taper blank holder is designed to be of two parts: stationary part with 5 degree taper angle and moving parts divided into eight tapered segments. the main functi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1998
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.64.4039