منابع مشابه
Calibration of Rotating Coil Arrays for Particle Accelerator Magnet Testing
Synchrotron particle accelerators are mainly composed of magnets. Long dipole magnets are employed to bend and to contain the beam within a circular trajectory. Their field quality is usually tested by arrays of rotating coils. Typically the measurements must be affected by low uncertainty (+10) and the calibration of the sensing coils, in terms of surface and angle, is critical. In this paper,...
متن کاملPotential Application of Magnesium Diboride for Accelerator Magnet Applications*
This paper reviews the potential of the newly discovered and unexpected 39 K superconductor MgB2 as a material for accelerator magnet strands. Unlike the high temperature cuprate superconductors, intergranular current flow in MgB2 is not obstructed by weak links, removing one serious obstacle to the fabrication of wires. The critical current density Jc exceeds 10 5 A/cm in 1 T field at 4.2 K an...
متن کاملNb Sn Accelerator Magnet Technology R & D at Fermilab
INTRODUCTION Nb3Sn accelerator magnets allow magnet operation above 10 T and drastically increase the coil temperature margin relative to NbTi magnets. Magnets with such parameters are needed for the LHC IR upgrade, cr mponents of ILC, MSR and MC magnet systems. Fermilab is developing Nb3Sn accelerator magnets using shell-type dipole coils and the wind-and-react method. The R&D program includes...
متن کاملA Compact Permanent Magnet Cyclotron for Accelerator Mass Spectrometry
We describe the development of a Cyclotron Mass Spectrometer (CMS) for the detection of trace amounts of rare isotopes. A compact low energy cyclotron optimized for high mass resolution has been designed and fabricated. The CMS has high sensitivity and is designed to measure 14C at abundances of 10-12. A novel feature of the CMS is the use of permanent magnets to energize the 30 cm diameter iro...
متن کاملAccelerator Physics Challenges in Future Linear Colliders
At the present time, there are a number of future linear collider designs with a center-of-mass energy of 500 GeV or more with luminosities in excess of 10 cm 2 s . Many of these designs are at an advanced state of development. However, to attain the high luminosity, the colliders require very small beam emittances, strong focusing, and very good stability. In this paper, some of the outstandin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Appiled Superconductivity
سال: 2005
ISSN: 1051-8223
DOI: 10.1109/tasc.2005.849530