Fused deposition modeling of poly(ether ether ketone) scaffolds
نویسندگان
چکیده
منابع مشابه
Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling
Compared to the common selective laser sintering (SLS) manufacturing method, fused deposition modeling (FDM) seems to be an economical and efficient three-dimensional (3D) printing method for high temperature polymer materials in medical applications. In this work, a customized FDM system was developed for polyether-ether-ketone (PEEK) materials printing. The effects of printing speed, layer th...
متن کاملPreliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications
Poly-ether-ether-ketone (PEEK) fabricated by fused deposition modeling for medical applications was evaluated in terms of mechanical strength and in vitro cytotoxicity in this study. Orthogonal experiments were firstly designed to investigate the significant factors on tensile strength. Nozzle temperature, platform temperature, and the filament diameter were tightly controlled for improved mech...
متن کاملReconstruction of frontal bone using specific implant polyether-ether-ketone.
Defects on the craniofacial complex may result in aesthetic defects, functional damage, and psychologic consequences. Previously, surgeons showed no interest in reconstructing the operated area, but in the treatment of the problem, leaving bone contour is a secondary issue. Nowadays, area reconstruction with post-reestablishment of contour and local shape has become one of the surgeon's priorit...
متن کاملLocal deformation behavior of surface porous polyether-ether-ketone.
Surface porous polyether-ether-ketone has the ability to maintain the tensile monotonic and cyclic strength necessary for many load bearing orthopedic applications while providing a surface that facilitates bone ingrowth; however, the relevant deformation behavior of the pore architecture in response to various loading conditions is not yet fully characterized or understood. The focus of this s...
متن کاملInfluence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
Fused deposition modeling (FDM) is a rapidly growing 3D printing technology. However, printing materials are restricted to acrylonitrile butadiene styrene (ABS) or poly (lactic acid) (PLA) in most Fused deposition modeling (FDM) equipment. Here, we report on a new high-performance printing material, polyether-ether-ketone (PEEK), which could surmount these shortcomings. This paper is devoted to...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: High Temperature Materials and Processes
سال: 2021
ISSN: 2191-0324,0334-6455
DOI: 10.1515/htmp-2021-0009