Fused Deposition Modeling of Polyamides: Crystallization and Weld Formation
نویسندگان
چکیده
منابع مشابه
Curved Layer Fused Deposition Modeling
Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...
متن کاملتدوین راه کار های کاربردی برای ساخت قطعات به روش fused deposition modeling با کاهش هزینه ساخت
فرآیندهای ساخت به روش افزودنی از دسته فرآیندهای تولیدی نوین صنعتی است که بر خلاف روش های مرسوم تولیدی، مانند جداسازی مواد(تراشکاری, فرز کاری و ...) و فرم دهی(کشش عمیق، اکستروژن و ...)، بر اساس افزودن لایه لایه مواد بر روی یکدیگر، تولید قطعات را انجام میدهند. فرآیندهای ساخت به روش افزودنی بر اساس نوع ماده مصرفی به سه دسته مایع پایه، پودر پایه و جامد پایه تقسیم بندی می شوند. فناوری مدل سازی با ر...
Dual-color mixing for fused deposition modeling printers
In this work we detail a method that leverages the two color heads of recent low-end fused deposition modeling (FDM) 3D printers to produce continuous tone imagery. The challenge behind producing such two-tone imagery is how to finely interleave the two colors while minimizing the switching between print heads, making each color printed span as long and continuous as possible to avoid artifacts...
متن کاملExtruder path generation for Curved Layer Fused Deposition Modeling
Extruder path generation for a new rapid prototyping technique named “Curved Layer Fused Deposition Modeling” (CLFDM) has been presented. The prototyping technique employs deposition of material in curved layers in contrast to flat layers as in Fused Deposition Modeling (FDM). The proposed method would be particularly advantageous over FDM in the manufacturing of thin, curved parts (shells) by ...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2020
ISSN: 2073-4360
DOI: 10.3390/polym12122980