Fundamental investigation of all- ceramic crowns. Part 1 Fit of all-ceramic crowns.
نویسندگان
چکیده
منابع مشابه
Internal fit of two all-ceramic systems and metal-ceramic crowns
OBJECTIVES The aim of this study was to investigate the internal fit (IF) of glass-infiltrated alumina (ICA--In-Ceram Alumina), yttria-stabilized tetragonal zirconia polycrystals (Y-TZP--IPS e.max ZirCAD), and metal-ceramic (MC--Ni-Cr alloy) crowns. MATERIAL AND METHODS Sixty standardized resin-tooth replicas of a maxillary first molar were produced for crown placement and divided into 3 grou...
متن کاملToughening of CAD/CAM all-ceramic crowns by staining slurry.
The ability of staining slurries containing silver and/or potassium compounds to enhance the mechanical properties of a leucite-reinforced glass ceramic (IPS Empress CAD) was investigated by measuring the Vickers hardness, median crack length, toughness, and compressive residual stress of specimens. A staining slurry containing potassium ions was found to increase the toughness of IPS specimens...
متن کاملClinical marginal and internal gaps of zirconia all-ceramic crowns.
PURPOSE Marginal and internal gaps of NobelProcera crown zirconia were clinically evaluated using silicone materials. MATERIALS AND METHODS Ninety-one crowns were examined before final cementation, and white and black silicone materials were used to record the marginal and internal fit. The silicone materials were sectioned bucco-lingually and mesio-distally, and the thickness of the silicone...
متن کاملSimulation of clinical fractures for three different all-ceramic crowns
Comparison of fracture strength and fracture modes of different all-ceramic crown systems is not straightforward. Established methods for reliable testing of all-ceramic crowns are not currently available. Published in-vitro tests rarely simulate clinical failure modes and are therefore unsuited to distinguish between the materials. The in-vivo trials usually lack assessment of failure modes. F...
متن کاملFactorial analysis of variables influencing stress in all-ceramic crowns.
OBJECTIVE The objective of this investigation was to evaluate the relative contribution of variables in the crown-cement-tooth system that can influence magnitude of maximum principal stress in all-ceramic crowns. METHODS.: Factorial analysis was performed to calculate the coefficients of main and interactive effects of seven variables on maximum stress distribution in a series of finite elemen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nihon Hotetsu Shika Gakkai Zasshi
سال: 1986
ISSN: 1883-177X,0389-5386
DOI: 10.2186/jjps.30.299