Functionally Graded Thermal Barrier Coatings with Improved Reflectivity and High-Temperature Capability
نویسندگان
چکیده
منابع مشابه
study of high temperature oxidation of duplex and functionally graded materials of thermal barrier coating (fgm tbc)
0
متن کاملMechanisms governing the high temperature erosion of thermal barrier coatings
The impact of thermal barrier coatings by hard projectiles at high temperature has been analyzed. Three different domains have been explored: each differentiated by particle size, velocity, temperature and TBC composition. Domain I applies when the projectile creates deeply penetrating plastic/densification zones. In this case, short time elastic effects are relatively unimportant. The response...
متن کاملThermal Buckling Analysis of Functionally Graded Euler-Bernoulli Beams with Temperature-dependent Properties
Thermal buckling behavior of functionally graded Euler-Bernoulli beams in thermal conditions is investigated analytically. The beam with material and thermal properties dependent on the temperature and position is considered. Based on the transformed-section method, the functionally graded beam is considered as an equivalent homogeneous Euler-Bernoulli beam with an effective bending rigidity un...
متن کاملSimulation of the high temperature impression of thermal barrier coatings with columnar microstructure
The phenomena governing the durability of thermal barrier coatings (TBCs) are affected by their high temperature mechanical properties: especially the mechanisms of material removal upon particle impact. Some high temperature properties can be explored using an impression test described in a companion article. The utility of the test is contingent upon a method for deconvoluting aspects of the ...
متن کاملResidual Stresses of Eb-pvd Thermal Barrier Coatings Exposed to High Temperature
The substrate material was nickel-based superalloy (In738LC), and CoNiCrAlY was pressureless plasma-sprayed on the substrate as the bond coating. As the top coating, zirconia with 4 mol% yttria was electron beam-physical vapor deposited (EB-PVD) on the rotating substrate. The rotation speeds in the EB-PVD process were 5, 10 and 20rpm. The specimens were exposed to 1273K in air atmosphere for 20...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science Forum
سال: 2009
ISSN: 1662-9752
DOI: 10.4028/www.scientific.net/msf.631-632.73