Functional ceramic support as an independent catalyst layer for direct liquid fuel solid oxide fuel cells

Direct hydrocarbon solid oxide fuel cells.

A Process Based Cost Model for Multi-Layer Ceramic Manufacturing of Solid Oxide Fuel Cells

Planar Solid Oxide Fuel Cell (SOFC) manufacturing can be considered in the pilot plant stage with efforts driving towards large volume manufacturing. The science of the solid oxide fuel cell is advancing rapidly to expand the knowledge base and use of material combinations and layer forming methods for the unit cell. Few of the many processing methods, > 15, reported in literature for layer for...

Ceramic - Based Anode for Solid - Oxide Fuel Cell Utilizes

490 MRS BULLETIN/JULY 2002 nated by intergranular fracture, while in AJM it was in a manner resembling ductile behavior. Improved surface finishing by AJM resulted in a 15% improvement in flexural strength, compared with both ground and ground-plus-lapped samples. The researchers concluded that a higher compressive residual stress observed on the AJM-processed surface, combined with the smoothe...

Solid Oxide Fuel Cells for Transportation

The well-known compatibility of the SOFC with hydrocarbon fuels makes the solid oxide fuel cell a strong contender for transportation applications. Gasoline and diesel will continue to be the dominant fuels for decades to come. The 500 million automobiles, the existing fuel distribution system and the economic power of oil and automobile companies combined form a strong inertia in favour of liq...

Materials for Solid Oxide Fuel Cells

Solid oxide fuel cells (SOFCs) have the promise to improve energy efficiency and to provide society with a clean energy producing technology. The high temperature of operation (500-1000 C) enables the solid oxide fuel cell to operate with existing fossil fuels and to be efficiently coupled with turbines to give very high efficiency conversion of fuels to electricity. Solid oxide fuel cells are ...