Functional Acrylic Emulsion PSAs for Film Label
نویسندگان
چکیده
منابع مشابه
All-acrylic film-forming colloidal polymer/silica nanocomposite particles prepared by aqueous emulsion polymerization.
The efficient synthesis of all-acrylic, film-forming, core-shell colloidal nanocomposite particles via in situ aqueous emulsion copolymerization of methyl methacrylate with n-butyl acrylate in the presence of a glycerol-functionalized ultrafine silica sol using a cationic azo initiator at 60 °C is reported. It is shown that relatively monodisperse nanocomposite particles can be produced with ty...
متن کاملDarnault Mirror: an Acrylic Emulsion Compensation System
This paper will discuss the evolution of the treatment for a 1751 French boiserie mirror retaining approximately 30% of its original gilding. In the first phase of the treatment, the mirror had been thoroughly analyzed and documented, tests were undertaken and cleaning and compensation method testing had commenced. This philosophical discussion was presented in a paper in the general session la...
متن کاملAcoustic Performance of Resilient Materials Using Acrylic Polymer Emulsion Resin
There have been frequent cases of civil complaints and disputes in relation to floor impact noises over the years. To solve these issues, a substantial amount of sound resilient material is installed between the concrete slab and the foamed concrete during construction. A new place-type resilient material is made from cement, silica powder, sodium sulfate, expanded-polystyrene, anhydrite, fly a...
متن کاملMultiple emulsion stability: pressure balance and interfacial film strength.
The objective of this study was to investigate the significance of inner and outer phase pressure, as well as interfacial film strength on W/O/W multiple emulsion stability using microscopy and long-term stability tests. It was observed that immediately upon applying a coverslip to samples the multiple droplets deformed and there was coalescence of the inner aqueous droplets. Under certain cond...
متن کاملCMOS-Integrated Film Bulk Acoustic Resonators for Label-Free Biosensing
The throughput is an important parameter for label-free biosensors. Acoustic resonators like the quartz crystal microbalance have a low throughput because the number of sensors which can be used at the same time is limited. Here we present an array of 64 CMOS-integrated film bulk acoustic resonators. We compare the performance with surface plasmon resonance and the quartz crystal microbalance a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Adhesion Society of Japan
سال: 2005
ISSN: 0916-4812,2187-4816
DOI: 10.11618/adhesion.41.467