Fume generation in CO2 arc welding by flux-cored wire.
نویسندگان
چکیده
منابع مشابه
Resistance of Weldclads Made by Flux-cored Arc Welding Technology against Erosive Wear
I. Pernis, J. Kasala, Alexander Dubček University of Trenčin, Faculty of Special Technology, Trenčin, Slovakia, D. Žabecká, Technical university of Košice, Faculty of Metallurgy, Košice, Slovakia The paper deals with the tribological properties of investigated types of hardfacing materials at erosive wear process. Infl uence of impact angle of abrasive grains on wear resistance and microhardnes...
متن کاملSensitivity model for prediction of bead geometry in underwater wet flux cored arc welding
To investigate influence of welding parameters on weld bead geometry in underwater wet flux cored arc welding (FCAW), orthogonal experiments of underwater wet FCAW were conducted in the hyperbaric chamber at water depth from 0.2 m to 60 m and mathematical models were developed by multiple curvilinear regression method from the experimental data. Sensitivity analysis was then performed to predic...
متن کاملControl of occupational exposure to hexavalent chromium and ozone in tubular wire arc-welding processes by replacement of potassium by lithium or by addition of zinc.
Hexavalent chromium [Cr(VI)] and ozone are produced in many arc-welding processes. Cr(VI) is formed when welding with chromium-containing alloys and is a suspected carcinogen. Ozone is formed by the action of ultraviolet light from the arc on oxygen and can cause severe irritation to the eyes and mucous membranes. Previous work has demonstrated that reduction of sodium and potassium in manual m...
متن کاملPerformance of a fume-exhaust gun system in CO2 arc welding.
Although the incidence of pneumoconiosis has been decreasing in Japan, welders’ health hazards due to welding fume inhalation are still serious, because effective engineering methods for controlling fumes are technically difficult to implement in many welding shops. In the 6th notification of general prevention of dust hazards issued by the Japanese Ministry of Health, Labor and Welfare (2003–2...
متن کاملGeneration rate of carbon monoxide from CO2 arc welding.
OBJECTIVES CO poisoning has been a serious industrial hazard in Japanese workplaces. Although incomplete combustion is the major cause of CO generation, there is a risk of CO poisoning during some welding operations. The aim of the present study was to evaluate the generation rate of CO from CO2 arc welding under controlled laboratory conditions and estimate the ventilation requirements for the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 1984
ISSN: 0288-4771
DOI: 10.2207/qjjws.2.638