Fully coupled numerical simulation techniques for 3D hydraulic fracturing
نویسندگان
چکیده
منابع مشابه
Simulating Fully 3D Hydraulic Fracturing
1.0 Introduction Hydraulic fracturing, the process of initiation and propagation of a crack by pumping fluid at relatively high flow rates and pressures, is one of several techniques for creating cracks in rock. Fractures in the earth's crust are desired for a variety of reasons, including enhanced oil and gas recovery, re-injection of drilling or other environmentally sensitive wastes, measure...
متن کاملA coupled finite element method for the numerical simulation of hydraulic fracturing with a condensation technique
Article history: Received 28 January 2014 Received in revised form 1 August 2014 Accepted 2 August 2014 Available online 10 August 2014
متن کاملOptimizing of hydraulic fracturing procedure using numerical simulation
This paper presents a modeling approach for three-dimensional simulation of hydraulic fracturing of jointed rock. Dynardo developed a 3D-hydraulic fracturing simulator and coupled the simulator with leading edge calibration and optimization algorithms to offers the software base to optimize gas production with computer simulation. With the integrated approach, an effective 3D numerical reservoi...
متن کاملHydraulic Fracturing Simulation for Fracture Networks
The term ‘Unconventional Reservoirs’ is used in the oil and gas industry for hydrocarbon reservoirs that have very low permeability in the magnitude of microdarcy (μd) and therefore rely on artificially introducing pathways for fluids and gases, commonly by using hydraulic fracturing techniques, to enable economic production. This approach of using fracturing stimulation campaigns is also incre...
متن کاملFully Coupled Geomechanics and Discrete Flow Network Modeling of Hydraulic Fracturing for Geothermal Applications
The primary objective of our current research is to develop a computational test bed for evaluating borehole techniques to enhance fluid flow and heat transfer in enhanced geothermal systems (EGS). Simulating processes resulting in hydraulic fracturing and/or the remobilization of existing fractures, especially the interaction between propagating fractures and existing fractures, represents a c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2018
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/1141/1/012085