Full bandwidth dynamic coarse integral holographic displays with large field of view using a large resonant scanner and a galvanometer scanner
نویسندگان
چکیده
منابع مشابه
A Condenser Scanner for Artifact-Free, Large Field of View, Full-Field X-ray Microscopy at Synchrotrons
Most full-field microscopes at synchrotrons exhibit a highly peaked illumination in the center of the field of view for stationary condenser and objective optics. This illumination pattern is typically reference-corrected by division with an image without the sample to correct for the uneven illumination. However, this correction does not rectify problems such as the poor signal-to-noise ratio ...
متن کاملLarge scan area high-speed atomic force microscopy using a resonant scanner.
A large scan area high-speed scan stage for atomic force microscopy using the resonant oscillation of a quartz bar has been constructed. The sample scanner can be used for high-speed imaging in both air and liquid environments. The well-defined time-position response of the scan stage due to the use of resonance allows highly linearized images to be obtained with a scan size up to 37.5 mum in 0...
متن کاملAutomatic Self-calibration of a Full Field-of-View 3D n-Laser Scanner
This paper describes the design, build, automatic self-calibration and evaluation of a 3D Laser sensor using conventional parts. Our goal is to design a system, which is an order of magnitude cheaper than commercial systems, with commensurate performance. In this paper we adopt point cloud “crispness” as the measure of system performance that we wish to optimise. Concretely, we apply the inform...
متن کاملIn-line digital holographic microscopy using a consumer scanner
We demonstrate an in-line digital holographic microscopy using a consumer scanner. The consumer scanner can scan an image with 4,800 dpi. The pixel pitch is approximately 5.29 μm. The system using a consumer scanner has a simple structure, compared with synthetic aperture digital holography using a camera mounted on a two-dimensional moving stage. In this demonstration, we captured an in-line h...
متن کاملDevelopment of a Large, Low-Cost, Instant 3D Scanner
Three-dimensional scanning serves a large variety of uses. It can be utilized to generate objects for, after possible modification, 3D printing. It can facilitate reverse engineering, replication of artifacts to allow interaction without risking cultural heirlooms and the creation of replacement bespoke parts. The technology can also be used to capture imagery for creating holograms, it can sup...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2018
ISSN: 1094-4087
DOI: 10.1364/oe.26.017459