Fuel Jet Flame in the Shear Flow over a Step : 1st Report The Possibility of Flame Stabilization

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

the effects of changing roughness on the flow structure in the bends

flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...

Flame Stabilization Using a Pulsed Plasma Discharge in Subsonic Flow

Stable combustion in a harsh environment, such as lean fuel concentration and/or low temperature conditions, is attractive because of its low emissions. However, such flames suffer from lack of stability. In our research, an AC plasma discharge is applied to a lifted jet flame to increase the stability of the flame. Two types of discharges are utilized for this experiment. First, a single elect...

متن کامل

Modeling of liquid ceramic precursor droplets in a high velocity oxy-fuel flame jet

Production of coatings by high velocity oxy-fuel (HVOF) flame jet processing of liquid precursor droplets can be an attractive alternative method to plasma processing. This article concerns modeling of the thermophysical processes in liquid ceramic precursor droplets injected into an HVOF flame jet. The model consists of several sub-models that include aerodynamic droplet break-up, heat and mas...

متن کامل

Investigation of Air Turbulence Intensity Effect on the Flame Structure in Different Flame Holder Geometry

In this paper, the effect of air turbulence intensity on the flame structure in various radii and lengths of a flame holder numerically studied. Finite volume method is used to solve the governing equations. The obtained numerical results using realizable k-ε and β-PDF models show a good agreement with the experimental data. The results show that flame holder with greater lengths yield shorter ...

متن کامل

Ignition and Flame Stabilization of a Strut-Jet RBCC Combustor with Small Rocket Exhaust

A Rocket Based Combined Cycle combustor model is tested at a ground direct connected rig to investigate the flame holding characteristics with a small rocket exhaust using liquid kerosene. The total temperature and the Mach number of the vitiated air flow, at exit of the nozzle are 1505 K and 2.6, respectively. The rocket base is embedded in a fuel injecting strut and mounted in the center of t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers

سال: 1969

ISSN: 0029-0270,2185-9485

DOI: 10.1299/kikai1938.35.127