Frontal crash simulation of vehicles against lighting columns using FEM
نویسندگان
چکیده
منابع مشابه
a study on thermodynamic models for simulation of 1,3 butadiene purification columns
attempts have been made to study the thermodynamic behavior of 1,3 butadiene purification columns with the aim of retrofitting those columns to more energy efficient separation schemes. 1,3 butadiene is purified in two columns in series through being separated from methyl acetylene and 1,2 butadiene in the first and second column respectively. comparisons have been made among different therm...
Brain Injury Differences in Frontal Impact Crash Using Different Simulation Strategies
In the real world crashes, brain injury is one of the leading causes of deaths. Using isolated human head finite element (FE) model to study the brain injury patterns and metrics has been a simplified methodology widely adopted, since it costs significantly lower computation resources than a whole human body model does. However, the degree of precision of this simplification remains questionabl...
متن کاملSimulation of Turbulent Flow Using FEM
An analysis of developing and fully developed turbulent flow was carried out when different techniques have been used in a zone close to the solid wall. In this paper, wall element technique based on the finite element method (FEM) has been adopted and compared with other techniques for determination of confined turbulent flow with a one equation model used to depict the turbulent viscosity is ...
متن کاملBrumbelow 1 IMPACT AND INJURY PATTERNS IN FRONTAL CRASHES OF VEHICLES WITH GOOD RATINGS FOR FRONTAL CRASH PROTECTION
Modern vehicle designs tested as part of US consumer information programs achieve high ratings for frontal crash protection. Research is needed to determine how these tests can be upgraded to further improve occupant protection in real-world frontal crashes. The present study is a detailed analysis of real-world cases with serious injuries resulting from frontal crashes of vehicles rated good f...
متن کاملImproving FEM crash simulation accuracy through local thickness estimation based on CAD data
In this paper, we present a method for estimating local thickness distribution in finite element models, applied to injection molded and cast engineering parts. This method features considerable improved performance compared to two previously proposed approaches, and has been validated against thickness measured by different human operators. We also demonstrate that the use of this method for a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Alexandria Engineering Journal
سال: 2013
ISSN: 1110-0168
DOI: 10.1016/j.aej.2013.01.005