From single phase to dual-phase TRIP-TWIP titanium alloys: Design approach and properties
نویسندگان
چکیده
منابع مشابه
Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys
High-entropy alloys (HEAs) consisting of multiple principle elements provide an avenue for realizing exceptional mechanical, physical and chemical properties. We report a novel strategy for designing a new class of HEAs incorporating the additional interstitial element carbon. This results in joint activation of twinning- and transformation-induced plasticity (TWIP and TRIP) by tuning the matri...
متن کاملDeformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys
In the present study, the microstructural evolution and the modulation of the mechanical properties have been investigated for a Co-Cr-Mo (CCM) ternary eutectic alloy by addition of a small amount of copper (0.5 and 1 at.%). The microstructural observations reveal a distinct dissimilarity in the eutectic structure such as a broken lamellar structure and a well-aligned lamellar structure and an ...
متن کاملThe Effects of Inhomogeneous Mechanical Properties of the Ferrite Phase on Dual Phase Steel’s Behavior
The microstructure of dual phase steels can be considered as a matrix of ferrite phase reinforced by martensite particles. Recent measurements show that the mechanical properties of the ferrite phase are changed with the distance from the martensite grains. In this paper, a new method has been proposed to consider this phenomenon in finite element modeling of dual phase steels microstructure. I...
متن کاملSynthesis of dual phase bronze alloys from elemental nanoparticle constituents
Dual phase (a þ b) copper–tin alloys were synthesized from elemental nanoparticle precursors following consolidation, annealing and quenching steps. The precursors were derived from the sequential reduction of tin and copper salts in ethanolic solution. The dual phase microstructure exhibits a duplex character with a mixture of Cu-rich and Sn-rich (a þ b) regions. 2004 Published by Elsevier Ltd...
متن کاملComputer Aided Design for Single-Phase Induction Motors Based on a New Gemoetrical Approach
Design of electrical motors normally involves two main stages: i) Preparation of the main dimensions and parameters. ii) Prediction of the performance. At the first stage the main dimensions of the motor, core stack Lfe and stator outer diameter Do, must be chosen. A set of performance conditions such as breakdown torque, desired output and other important parameters must satisfy the internatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materialia
سال: 2020
ISSN: 2589-1529
DOI: 10.1016/j.mtla.2020.100700