Frictional Pressure Drop in Steam Generating Tubes : 3rd Report, Experimental Investigation of the Dynamic Characteristics
نویسندگان
چکیده
منابع مشابه
Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation
The fundamental frequencies and mode shapes of steel and carbon fiber–reinforced plastic (CFRP) cylindrical shells with steel inserts were investigated using finite element analysis and modal testing. The free-free boundary condition was tested with modal testing using the roving hammer method and verified by finite element analysis using ABAQUS. The results show good agreement between the test...
متن کاملTwo Phase Frictional Pressure Drop of Carbon Dioxide in Horizontal Micro Tubes
Two-phase frictional pressure drop data were obtained for condensation of carbon dioxide in single horizontal micro tube of inner diameter ranged from 0.6 mm up to 1.6 mm over mass flow rates from 2.5*10 to 17*10 kg/s and vapor qualities from 0.0 to 1.0. The inlet condensing pressure is changed from 33.5 to 45 bars. The saturation temperature ranged from -1.5 C up to 10 C. These data have then ...
متن کاملInvestigation of convective heat transfer, pressure drop and efficiency of ZnO/water nanofluid in alternating elliptical axis tubes
In this study, for the first time, the heat transfer and the pressure drop of zinc oxide nanoparticles in alternating elliptical axis (AEA) tube have been investigated experimentally. The zinc oxide nanoparticles were at volumetric concentrations 1% and 2%. The base fluid was heat transfer oil and the experiments were conducted at constant wall temperature. Also, the study was done in Reynolds ...
متن کاملnumerical investigation of tub side heat transfer and pressure drop in helically corrugated tubes
this paper presents a three-dimensional numerical investigation carried out in turbulent forced convection in a tube with helical ribs. enhancement of heat transfer using helically corrugated tubes has beenstudied experimentally by many researchers but there exist a few published numerical analyses results. the paper also introduces the results of heat transfer and friction factor data for inco...
متن کاملExperimental and numerical crashworthiness investigation of hybrid composite aluminum tubes under dynamic axial and oblique loadings
This research deals with axial and oblique impact crash tests on simple and hybrid composite tubes. Axial and oblique impact tests have been generated on simple and hybrid composite tubes with one, two and three layers. A drop test rig was used to conduct the experiments. Furthermore, in order to gain more detailed knowledge about the crash process, finite element simulations of the experim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1971
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.37.1212