Frictional Pressure Drop in Steam Generating Tubes: 1st Report Static Characteristics of Frictional Pressure Drop
نویسندگان
چکیده
منابع مشابه
Two Phase Frictional Pressure Drop of Carbon Dioxide in Horizontal Micro Tubes
Two-phase frictional pressure drop data were obtained for condensation of carbon dioxide in single horizontal micro tube of inner diameter ranged from 0.6 mm up to 1.6 mm over mass flow rates from 2.5*10 to 17*10 kg/s and vapor qualities from 0.0 to 1.0. The inlet condensing pressure is changed from 33.5 to 45 bars. The saturation temperature ranged from -1.5 C up to 10 C. These data have then ...
متن کاملUniversal approach to predicting two-phase frictional pressure drop for mini/micro-channel saturated flow boiling
This paper is a part of a recent series of studies by the authors to develop universal predictive tools for pressure drop and heat transfer coefficient for mini/micro-channel flows that are capable of tackling fluids with drastically different thermophysical properties and very broad ranges of all geometrical and flow parameters of practical interest. In this study, a new technique is proposed ...
متن کاملCFD Simulations of Pressure Drop in KATAPAK-S Structured Packing
KATAPAK-S is a type of structured catalytic packing, which is used in reactive distillation processes. The dry pressure drop characteristic (the pressure drop in the absence of liquid flow) is of significant importance for the investigation of process hydrodynamics. In this paper, the dry pressure drop within the catalyst packed channels of KATAPAK-S has been investigated using Computational Fl...
متن کاملA Comparison of Static Occlusion Setting Methods : Fluid Drop Rate and Pressure Drop
Tubing circuits primed with water were constructed on two roller pumps to characterize and compare two static methods of setting the occlusion on roller pumps (fluid drop rate and pressure drop rate). Twelve separate experiments were performed in which PVC boot tubing diameters (1/2 in, 3/8 in and 1/4 in), roller position (each roller alone on a two roller pump) and roller occlusion (total occl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1969
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.35.2278