Frictional Characteristic Curves of Ground Surfaces in Lubricated Sliding

نویسندگان

چکیده

The key objective of the presented study was to use a commercially feasible and scalable approach modifying surfaces reduce friction. In an industrial setting, surface grinding is viable as compared other processes like laser texturing, plasma, or ion beam milling. Frictional force plots are generated from lubricated contact interface between flat-faced aluminum pin reciprocating stainless steel countersurface driven by scotch yoke follower mechanism. Using grinder selecting coated abrasive sheets, different specimens, classified P320, P1200, mirror were prepared tested in this study. frictional encountered recorded using data acquisition system at discrete intervals path averaged along sliding cycles. shape thus found be each other. Various mechanisms friction prevalent presumed influence these plots. These varying speeds, lubricating oil viscosities, tribofilm-forming additives. We used Group 1 base two viscosities our tests. At lower plot for mirror-finished seemed conform Stribeck curve, while same scale reference, P1200 had that nearly flat very low magnitude. interface, there fine balance existing adhesion abrasion phenomena, retention promoted achieve extremely

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Sliding lubricated anisotropic rough surfaces.

The object of this paper is to study the effects of lubricant film flow, pressurized and sheared between two parallel rough surfaces in sliding motion. The influence of microscopic surface roughness on lubricant film flow macroscopic behavior is described through five nondimensional parameters called flow factors. These macroscopic transport parameters are related to the local geometry of apert...

متن کامل

Asymmetric frictional sliding between incommensurate surfaces

We study the frictional sliding of two ideally incommensurate surfaces with a third incommensurate sheet – a sort of extended lubricant – in between. When the mutual ratios of the three periodicities in this sandwich geometry are chosen to be the golden mean φ = (1 + √ 5)/2, this system is believed to be statically pinned for any choice of system parameters. In the present study we overcome thi...

متن کامل

Onset of frictional sliding of rubber–glass contact under dry and lubricated conditions

Rubber friction is critical in many applications ranging from automotive tyres to cylinder seals. The process where a static rubber sample transitions to frictional sliding is particularly poorly understood. The experimental and simulation results in this paper show a completely different detachment process from the static situation to sliding motion under dry and lubricated conditions. The res...

متن کامل

Stability of Sliding Frictional Surfaces with Varying Normal Force

This paper presents the stability analysis of a single degree of freedom elastic system following a rateand state-dependent friction law. Normal force is assumed to depend on the displacement, velocity and acceleration of the sliding interface. The history dependence of friction on normal force is included in the analysis. It is shown that to achieve steady sliding, system sti ness must exceed ...

متن کامل

Curves on Surfaces of Mixed Characteristic

The classi cation of foliated surfaces, [McQ08], is applied to the study of curves on surfaces with big co-tangent bundle and varying moduli, be it purely in characteristic zero, or, more generally when the characteristic is mixed. Almost everything that one might naively imagine is true, but with one critical exception: rational curves on bi-disc quotients which aren't quotients of products of...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Lubricants

سال: 2023

ISSN: ['2075-4442']

DOI: https://doi.org/10.3390/lubricants11090354