Friction welding of AA6061 to AISI 4340 using silver interlayer
نویسندگان
چکیده
منابع مشابه
Dissimilar Welding of EN 10025 Carbon Steel to AISI 316L Stainless Steel by Friction Stir Welding
In the present Study, a dissimilar joint of carbon steel sheet EN 10025 with 316 L has been welded by FSW and the welding parameters were optimized by RSM software method. For investigation of mechanical properties and microstructural analysis carried out by using optical, scanning electron microscopes with EDS analysis, tensile and hardness test of different area of joints, SZ, TMAZ, HAZ, thei...
متن کاملDissimilar Welding of EN 10025 Carbon Steel to AISI 316L Stainless Steel by Friction Stir Welding
In the present Study, a dissimilar joint of carbon steel sheet EN 10025 with 316 L has been welded by FSW and the welding parameters were optimized by RSM software method. For investigation of mechanical properties and microstructural analysis carried out by using optical, scanning electron microscopes with EDS analysis, tensile and hardness test of different area of joints, SZ, TMAZ, HAZ, thei...
متن کاملExperimental investigation of Tool Geometry on Mechanical Properties of Friction Stir Welding of AA6061
AA 6061 has gathered wide acceptance in the fabrication of the light structures required to high strength. Compared to the fusion welding processes that are used for joining structural aluminium alloys, friction stir welding (FSW) process is an emerging solid state joining process in which the material that is being welded does not melt and recast. In this experimental work, an extensive invest...
متن کاملMetallurgical and Mechanical Behavior of AISI 316- AISI 304 during Friction Welding Process
Present study focuses on the micro-structural and mechanical behavior effect of friction time for similar (AISI 316-AISI 316 and AISI 304-AISI 304) and dissimilar (AISI 304-AISI 316) joint during continuous drive friction welding. The welding carried out with different friction time: 6.5, 8.5 and 10 s while kept all other conditions constant. The effect of that time on the strength, structural ...
متن کاملFeasibility study of friction stir welding of 6061-T6 aluminium alloy with AISI 1018 steel
The present work demonstrates that friction stir welding (FSW) is a feasible route for joining 6061 aluminium (Al) alloy to AISI 1018 steel. The weld has a good weld quality and is free of cracks and porosity. The tensile failure happened at the boundary between the nugget and thermomechanically affected zone of the base Al alloy, indicating that the weld has a higher joining strength. Despite ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Defence Technology
سال: 2015
ISSN: 2214-9147
DOI: 10.1016/j.dt.2015.05.007