Friction - wear modeling in drilling process of H-13 tool steel
نویسندگان
چکیده
منابع مشابه
tool wear modeling in drilling process of aisi1020 and aisi8620 using genetic programming
in manufacturing industry, it has been acknowledged that tool wear prediction has an important role in higher quality of products and acceptable efficiency. being an emerging area of research in recent years, drilling tool wear is an important factor which directly affects quality parameters of machined hole such as hole centring, roundness, burr formation and finished surface. in this paper, t...
متن کاملThermo-Mechanical Finite Element Modeling of the Friction Drilling Process
Friction drilling uses a rotating conical tool to penetrate the workpiece and create a bushing in a single step without generating chips. This research investigates the threedimensional (3D) finite element modeling (FEM) of large plastic strain and hightemperature work-material deformation in friction drilling. The explicit FEM code with temperature-dependent mechanical and thermal properties, ...
متن کاملEVALUATION OF THE MECHANICAL PROPERTIES OF NIOBIUM MODIFIED CAST AISI H 13 HOT WORK TOOL STEEL
Abstract: mechanical properties of AISIH 13 hot-work tool steel have been studied. Cast samples made of the modified new steel were homogenized and austenitized at different conditions, followed by tempering at the specified temperature ranges. Hardness, red hardness, three point bending test and Charpy impact test were carried out to evaluate the mechanical properties together with characteriz...
متن کاملEnhancement Wear Properties of HSS-M2 Tool Steel with WC Deposited by SMAW Process
In this study, the effect of cladded tungsten carbide layer upon HSS - M2 tool steel on microstructure, hardness, and wear behavior has been studied in two cases without using the middle layer and using the middle layer of nickel. Tungsten Carbide cladded on HSS - M2 tool steel by Arc Weld ( SMAW ). The ASTM-G65 wear test was used to determine its application for use in the mineral indus...
متن کاملCheck Tic-coated Tungsten Carbide Tool Wear in Machining Steel
In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2021
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/1037/1/012013