Friction stir welding of AA5083 aluminium alloy: Multi-response optimization using Taguchi-based grey relational analysis
نویسندگان
چکیده
منابع مشابه
Welding Parameter Optimization of Alloy Material by Friction Stir Welding using Taguchi Approach
Friction stir welding is used as a solid state joining process for soft materials such as aluminium alloys and also for hard materials like steels. It avoids many of the common problems obtained in fusion welding. In mechanical, civil, automobile, naval, and aeronautical engineering beams are widely used of the magnesium alloys for different applications and that are joined by conventional iner...
متن کاملAnalysis and Comparison of Friction Stir Welding and Laser Assisted Friction Stir Welding of Aluminum Alloy
Friction Stir Welding (FSW) is a solid-state joining process; i.e., no melting occurs. The welding process is promoted by the rotation and translation of an axis-symmetric non-consumable tool along the weld centerline. Thus, the FSW process is performed at much lower temperatures than conventional fusion welding, nevertheless it has some disadvantages. Laser Assisted Friction Stir Welding (LAFS...
متن کاملMulti-Response Optimization of Resin Finishing by Using a Taguchi-Based Grey Relational Analysis
In this study, the influence and optimization of the factors of a non-formaldehyde resin finishing process on cotton fabric using a Taguchi-based grey relational analysis were experimentally investigated. An L27 orthogonal array was selected for five parameters and three levels by applying Taguchi's design of experiments. The Taguchi technique was coupled with a grey relational analysis to obta...
متن کاملMulti-objective optimization in WEDM of D3 tool steel using integrated approach of Taguchi method & Grey relational analysis
In this paper, wire electrical discharge machining of D3 tool steel is studied. Influence of pulse-on time, pulse-off time, peak current and wire speed are investigated for MRR, dimensional deviation, gap current and machining time, during intricate machining of D3 tool steel. Taguchi method is used for single characteristics optimization and to optimize all four process parameters simultaneous...
متن کاملMulti-objective optimization in Turning of EN31 steel using Taguchi based grey relational analysis
Machining can be outlined as the process of taking away material from a work piece in the grade of chips. During a machining process, isolated of the energy is turned into heat energy through the detritions yielded between the tool and the work piece and the plastic deformation of the work material in the machining zone. Turning is charmed by several constituents, for example, the cutting speed...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Mechanical Engineering
سال: 2016
ISSN: 1687-8140,1687-8140
DOI: 10.1177/1687814016679277