Friction and wear properties of glass fiber reinforced polyphenylene sulfide composites
نویسندگان
چکیده
منابع مشابه
Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملMechanical properties of woven glass fiber-reinforced composites.
The aim of this investigation was to measure the flexural and compressive strengths and the corresponding moduli of cylindrical composite specimens reinforced with woven glass fiber. Test specimens were made by light-curing urethane dimethacrylate oligomer with woven glass fiber of 0.18-mm standard thickness. Tests were conducted using four reinforcement methods and two specimen diameters. Flex...
متن کاملVibration Analysis of Glass Fiber Reinforced Composites
Glass fiber reinforced resol/vac-eha composites have been fabricated in laboratory to determine the dynamic behavior of glass fiber reinforced composites. Resol solution was blended with vinyl acetate-2-ethylhexyl acrylate (vac-eha) resin in an aqueous medium with varying volume fraction of glass fibers. The role of fiber/matrix interactions in glass fibers reinforced composites were investigat...
متن کاملFatigue analysis of glass fiber reinforced composites
Some structure materials can match the flexibility and effectiveness of glass fiber Reinforced plastic, commonly called GFRP for short or simply fiberglass. Even it is very high strength, light weight, strong, and completely waterproof, it can be molded into free form shapes such as aerospace structures, and then also it has its endurance limits. Endurance limit means loss of strength and stiff...
متن کاملEffect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sakarya University Journal of Science
سال: 2020
ISSN: 1301-4048
DOI: 10.16984/saufenbilder.731914