Friction and Wear of Fe-M-S Ternary Alloy Systems
نویسندگان
چکیده
منابع مشابه
THE EFFECT OF HEAT TREATMENT ON ABRASIVE WEAR RESISTANCE OF Fe-34Cr-4.5C%WT HARDFACING ALLOY
Abstract: Hardfacing is one of the most useful and economical ways to increase the service life of components subjected to abrasive wear. Iron based hardfacing alloys have long been considered as candidate coatings for wear-resistant applications in industry. In the present work two layer of Fe-34Cr-4.5C%wt hardfacing alloy was deposited on ASTM A36 carbon steel plates by SMAW method. The m...
متن کاملNanoscale friction and wear maps.
Friction and wear are part and parcel of all walks of life, and for interfaces that are in close or near contact, tribology and mechanics are supremely important. They can critically influence the efficient functioning of devices and components. Nanoscale friction force follows a complex nonlinear dependence on multiple, often interdependent, interfacial and material properties. Various studies...
متن کاملLiquid-Liquid Equilibrium for the Ternary Systems of Solvent+ m/o/p-Cresol+Water: Thermodynamic Modeling
In this study, NRTL and UNIQUAC thermodynamic models were used to predict the composition of ternary mixtures of solvents+ m/o/p-cresol+ water in organic and aqueous phases. Various solvents are used for the separation of cresols from water. In this study, methyl propyl ketone, methyl isopropyl ketone, methyl butyl ketone, and methyl isobutyl ketone solvents were investigated. Intermolecular in...
متن کاملModelling Friction and Abrasive Wear of Elastomers
In order to properly model the friction and wear of elastomer materials, it is essential to understand some specific mechanical and tribological features. Mechanical characteristics of elastomer materials are different from those of metals and other relatively hard materials. Elastomers can bear large deformations, the stress-strain curves are non-linear, time and temperature dependent. When th...
متن کاملFriction and wear of restorative dental materials.
Many different instruments have been developed for the measurement of friction and wear.1-5 Often the instrument was designed to accommodate some particular type of material, environment, or test condition. Studies reported in the dental literature have been limited to wear measurements with simulated toothbrushing methods,6-9 or on prosthetic teeth mounted on an articulator.10 This study will ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1974
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.38.3_213