Friction and wear mechanisms in boundary lubricated oxy-nitrided treated samples
نویسندگان
چکیده
منابع مشابه
Mild Wear Prediction of Boundary-Lubricated Contacts
In this paper, a wear model is introduced for the mild wear present in boundary-lubricated systems protected by additive-rich lubricants. The model is based on the hypothesis that the mild wear is mainly originating from the removal of the sacrificial layer formed by a chemical reaction between the base material and the additive packages present in the lubricant. By removing a part of this laye...
متن کاملRole of Surface Texture on Friction and Wear under Boundary Lubricated Conditions
Ensuring effective lubrication between sliding surfaces is one of the challenges in the field of tribology. In addition to the conventional parameters like speed, load, contact geometry and material parameters, the surface texture also influences the coefficient of friction. In the present investigation, the effect of surface texture on coefficient of friction under boundary lubricated conditio...
متن کاملRoughness and wettability of surfaces in boundary lubricated scuffing wear
The diversity of multidisciplinary approaches suggests that fundamentals of scuffing require systemic, complex multi-scale and multi-physics analysis of an irreversible process as it is postulated in present study. That is probably one of the reasons of lack of unequivocal model of this irreversible transitional process from stable more or less lubricated wear to scuffing described only by one ...
متن کاملFriction models for sliding dry, boundary and mixed lubricated contacts
Friction, lubrication, and wear have a strong influence on the performance and behavior of mechanical systems. This paper deals with different friction models for sliding contacts running under different conditions. The models presented are suited to different situations, depending on the type of contact, running conditions, and the behavior of interest. The models will be discussed from simula...
متن کاملThe Effect to Epsilon Phase on the Friction and Wear of Nitrided Die Steels (RESEARCH NOTE)
In this paper, the wear resistance and antifriction of epsilon phase layer and diffusion layer of gas nitrided D2 steel and M2 steel have been studied. The changes m wear mechanism of epsilon phase under the load from 20N to 200N are analysed. When the load is lighter than 100N, it is mainly oxidizing wear on friction surface. The adhesion, peeling off and abrasive wear appear on friction surfa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Wear
سال: 2016
ISSN: 0043-1648
DOI: 10.1016/j.wear.2016.09.010