Friction and Wear Characteristics of Composite Materials for Architectural Membrane
نویسندگان
چکیده
منابع مشابه
Friction and wear of restorative dental materials.
Many different instruments have been developed for the measurement of friction and wear.1-5 Often the instrument was designed to accommodate some particular type of material, environment, or test condition. Studies reported in the dental literature have been limited to wear measurements with simulated toothbrushing methods,6-9 or on prosthetic teeth mounted on an articulator.10 This study will ...
متن کاملInvestigation of friction and wear characteristics of palm biodiesel
0196-8904/$ see front matter 2012 Elsevier Ltd. A http://dx.doi.org/10.1016/j.enconman.2012.12.002 ⇑ Corresponding author. Tel.: +60 3 79675212; fax: E-mail addresses: [email protected] (M.A. Fazal), Haseeb), [email protected] (H.H. Masjuki). Use of biodiesel in automobile engine is creating tribology related new challenges. The present study aims to assess the friction and wear characteristics o...
متن کاملA physically-based abrasive wear model for composite materials
A simple physically-based model for the abrasive wear of composite materials is presented based on the mechanics and mechanisms associated with sliding wear in soft (ductile)matrix composites containing hard (brittle) reinforcement particles. The model is based on the assumption that any portion of the reinforcement that is removed as wear debris cannot contribute to the wear resistance of the ...
متن کاملMicrostructural Characterisation and Wear Behaviour of Diamond Composite Materials
Since the initial research leading to the production of diamond composite materials, there have been several important developments leading to significant improvements in the properties of these superhard composite materials. Apart from the fact that diamonds, whether originating from natural resources or synthesised commercially, are the hardest and most wear-resistant materials commonly avail...
متن کاملWear test of composite restorative materials by a polishing machine.
The wear resistance of microfilled and conventional composite resins, was examined, using two sizes of abrasive particles for polishing. The mechanical properties of the composite resins were also studied and evaluated in relation to wear. Conventional composites showed much lower wear resistance than the microfilled resins. The amalgam and human enamel abraded with 10ƒÊm SiC particles, had str...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tribology Online
سال: 2008
ISSN: 1881-2198
DOI: 10.2474/trol.3.376