Friction and wear behavior of Cu–4 wt.%Ni–TiC composites under dry sliding conditions
نویسندگان
چکیده
منابع مشابه
Dry Sliding Wear Behavior of Epoxy-Rubber Dust Composites
Composite pins of rubber dust collected from tyre retreading centres of trucks, cars and buses etc.and epoxy with weight percentages of 10. 15, and 20 % of rubber (weight fractions of 9, 13 and 17 % respectively) have been prepared in house with the help of a split wooden mould. The pins were tested in a pin-on-disc wear monitor to determine the co-efficient of friction and weight losses with v...
متن کاملFriction and wear behavior of human teeth under various wear conditions
Previous reports have described the differences in the friction and wear behavior between different zones of human teeth. The objective of this research was to study the friction and wear behavior of human teeth under different wear conditions to extend the understanding of the tooth wear process, as well as to provide a more rational explanation for wear mechanism of teeth. Two typical wear te...
متن کاملTribological behaviors of several polymer–polymer sliding combinations under dry friction and oil-lubricated conditions
The friction and wear properties of polyamide 66 (PA66), polyphenylene sulfide (PPS) and polytetrafluoroethylene (PTFE) sliding against hemselves under dry sliding and oil-lubricated conditions were studied by using a pin-on-disc tribometer. The effect of applied load and sliding peed on tribological behaviors of the polymer–polymer sliding combinations under dry sliding and oil-lubricated cond...
متن کاملTHE EFFECT OF VARIOUS PARAMETERS ON DRY SLIDING WEAR BEHAVIOR AND SUBSURFACE OF AGED HYBRID METAL MATRIX COMPOSITES USING TAGUCHI TECHNIQUE
The effects of applied load, sliding speed and sliding distance on the dry sliding wear behavior of aged Al-SiCp-Gr composites were investigated. The specimen were fabricated by stir-casting technique. The pin-on-disc wear testing machine was used to investigate the wear rate by design of experiments based on L27 using Taguchi technique. Sliding distance was the most important variable that inf...
متن کاملReciprocating sliding friction and wear behavior of electrical discharge machined zirconia-based composites against WC–Co cemented carbide
a Department of Mechanical Construction and Production, Ghent University (UGent), IR04, Sint-Pietersnieuwstraat 41, B-9000 Gent, Belgium b Department of Metallurgy and Materials Engineering, Catholic University Leuven (K.U. Leuven), MTM, Kasteelpark Arenberg 44 (bus 2450), B-3001 Leuven, Belgium c Department of Mechanical Engineering, Catholic University Leuven (K.U. Leuven), PMA, Celestijnenla...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Friction
سال: 2017
ISSN: 2223-7690,2223-7704
DOI: 10.1007/s40544-017-0157-7