Fretting Fatigue Strength Properties of Pearlitic and Bainitic Steels with Medium Carbon Steel Contact Material.
نویسندگان
چکیده
منابع مشابه
High-Strength Bainitic Steels
With careful design, mixed microstructures consisting of fine plates of upper bainitic ferrite separated by thin films of stable retained austenite have exhibited impressive combinations of strength and toughness in highsilicon bainitic steels. The silicon suppresses the precipitation of brittle cementite leading to an improvement in toughness. The essential principles governing the optimisatio...
متن کاملRolling Contact Fatigue Performances of Carburized and High-C Nanostructured Bainitic Steels
In the present work, the nanostructured bainitic microstructures were obtained at the surfaces of a carburized steel and a high-C steel. The rolling contact fatigue (RCF) performances of the two alloy steels with the same volume fraction of undissolved carbide were studied under lubrication. Results show that the RCF life of the carburized nanostructured bainitic steel is superior to that of th...
متن کاملOptimization of Mechanical Properties of High-Carbon Pearlitic Steels with SI and V Additions
continuous grain-boundary cementite can form and cause THE primary requirements for high-strength wire appliembrittlement.[4,5] Nevertheless, we have found that it is cations are tensile strength, ductility, and formability. Coldpossible to use pearlitic steels with carbon contents greater drawn plain-carbon pearlitic steels have commonly been than 0.8 wt pct without the formation of a continuo...
متن کاملhigh-strength bainitic steels
with careful design, mixed microstructures consisting of fine plates of upper bainitic ferrite separated by thinfilms of stable retained austenite have exhibited impressive combinations of strength and toughness in highsiliconbainitic steels. the silicon suppresses the precipitation of brittle cementite leading to an improvement intoughness. the essential principles governing the optimisation o...
متن کاملAnalysis of Fatigue Crack Paths in Cold Drawn Pearlitic Steel
In this paper, a fracto-metallographic analysis was performed on the cracked specimens of cold drawn pearlitic steel subjected to fatigue tests. Fatigue cracks are transcollonial and exhibit a preference for fracturing pearlitic lamellae, with non-uniform crack opening displacement values, micro-discontinuities, branchings, bifurcations and frequent local deflections that create microstructural...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1998
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.47.1065