Frequency stabilisation of a fibre-laser comb using a novel microstructured fibre
نویسندگان
چکیده
منابع مشابه
The optical frequency comb fibre spectrometer
Optical frequency comb sources provide thousands of precise and accurate optical lines in a single device enabling the broadband and high-speed detection required in many applications. A main challenge is to parallelize the detection over the widest possible band while bringing the resolution to the single comb-line level. Here we propose a solution based on the combination of a frequency comb ...
متن کاملRaman Spectra of a PMMA Microstructured Optical Fibre and Direct Measurement of Its Gain Coefficient
A polymethylmethacrylate (PMMA) microstructured polymer optical fiber (mPOF) is fabricated and characterized. Using the cut-back technique the fiber loss is measured which is higher than the step-index silica fibers. Through a novel experimental scheme, the backward Stokes spectrum of the fabricated mPOF is recorded over a range exceeding 3000 cm‑1 during the cut-back method and compared ...
متن کاملImaging with microstructured polymer fibre.
The imaging capabilities of a multicore microstructured polymer optical fibre with a square array of 112 air holes are demonstrated. Coherent imaging is achieved either by guiding light in polymer cores between air holes, or by guiding light in the air channels themselves. This potentially provides a miniaturised endoscope for medical applications, or a two-dimensional parallel optical data lin...
متن کاملFibre optics wavemeters calibration using a self-referenced optical frequency comb.
Self-referenced optical frequency combs enable the measurement of optical frequencies with a very high accuracy, achieving uncertainties close to the atomic clock used as reference (<10(-13) s). In this paper, we present the technique for the measurement of laser frequencies for optical communications followed at IO-CSIC and its application to the calibration of two wavemeters in the 1.5 μm opt...
متن کاملNovel fibre laser sources based on point-by-point femtosecond laser inscribed fibre Bragg gratings
Like any other laser, a fibre laser consists of an active medium (in this case a piece of doped optical fibre) between two feedback elements. While Fresnel reflection from the fibre end facet can assume the role of a broadband partially reflecting output coupler, fibre Bragg gratings (FBGs) are an obvious choice for the implementation of a frequency selective high reflector in an all-fibre desi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2009
ISSN: 1094-4087
DOI: 10.1364/oe.17.005897