Freeze-thaw stabilization of fused deposition modeling 3D-printed SABIC structures
نویسندگان
چکیده
منابع مشابه
Strengthening of 3D Printed Fused Deposition Manufactured Parts Using the Fill Compositing Technique
In this paper, we present a technique for increasing the strength of thermoplastic fused deposition manufactured printed parts while retaining the benefits of the process such as ease, speed of implementation, and complex part geometries. By carefully placing voids in the printed parts and filling them with high-strength resins, we can improve the overall part strength and stiffness by up to 45...
متن کاملCurved Layer Fused Deposition Modeling
Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...
متن کاملStudy on the Effect of Fused Deposition Modeling (FDM) Process Parameters on the Printed Part Quality
3D printing known as additive manufacturing (AM) has been applied for applications in different fields such as aerospace, automotive, biomedical, and energy industries. It is the fact that 3D printing has gained a very wide acceptance over the last decade. However, several significant hurdles prevent its wider adoption. One of the most important barriers is the quality of the printed parts. Cur...
متن کاملFreeze-Thaw Bayesian Optimization
In machine learning, the term “training” is used to describe the procedure of fitting a model to data. In many popular models, this fitting procedure is framed as an optimization problem, in which a loss is minimized as a function of the parameters. In all but the simplest machine learning models, this minimization must be performed with an iterative algorithm such as stochastic gradient descen...
متن کاملSimple and Versatile 3D Printed Microfluidics Using Fused Filament Fabrication.
The uptake of microfluidics by the wider scientific community has been limited by the fabrication barrier created by the skills and equipment required for the production of traditional microfluidic devices. Here we present simple 3D printed microfluidic devices using an inexpensive and readily accessible printer with commercially available printer materials. We demonstrate that previously repor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of King Saud University - Engineering Sciences
سال: 2020
ISSN: 1018-3639
DOI: 10.1016/j.jksues.2020.09.002