Fracture Toughness Prediction Model for Low-carbon Bainite Steels Containing Inter-lath Martensite
نویسندگان
چکیده
منابع مشابه
Carbon Diffusion and Kinetics During the Lath Martensite Formation
Calculations verify that carbon diffusion may occur during the lath martensite fomtion. Accordingly,the diffusion of int2rstitial ator ions must be taka into account nhfn martmitic transformtion is defined as a diffusionless transformation. In derivation of the kinetics equation of the ath& martensitic transfomtion,rzgardng the c a r h diffusion, i .e.the enrichment of the austenite during the ...
متن کاملColor metallography; a suitable method for characterization of martensite and bainite in multiphase steels
Color metallography is a useful method for characterizing microstructures of steels with multiple phases. In this paper, application of three different color etching techniques for a bainitic-martensitic steel is reported. Comparisons between the results showed that 10% Na2S2O5 aqueous solution was the best etchant for distinguishing martensite, bainite and ferr...
متن کاملThe Developing Prospect of Air-cooled Bainitic Steels
The unique properties of air-cooled bainitic steels have been described. A series of Mn containing air-cooled bainitic steels invented by authors is presented in this paper: including low carbon granular bainitic steels, low carbon grain-boundary allotriomorphic ferrite/granular bainite duplex steels, medium and medium high carbon bainite/martensite duplex steel, and low carbon carbide free bai...
متن کاملEffect of Mo Content on Microstructure and Property of Low-Carbon Bainitic Steels
In this work, three low-carbon bainitic steels, with different Mo contents, were designed to investigate the effects of Mo addition on microstructure and mechanical properties. Two-step cooling, i.e., initial accelerated cooling and subsequent slow cooling, was used to obtain the desired bainite microstructure. The results show that the product of strength and elongation first increases and the...
متن کاملAN INVESTIGATION TO BAINITE FORMATION MORPHOLOGIES IN NI-CR BEARING LOW CARBON STEELS THROUGH THERMOMECHANICAL PROCESSING
The presence of bainite in the microstructure of steels to obtain a proper combination of strength and toughness has always been desired. The previous works however have shown that the presence of preferred bainite morphologies in the microstructure of any steel would not be readily accessible. In addition, the appearance of different bainite morphologies in the microstructure of any steel is d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 2016
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane.tetsu-2015-083